April 2011 ~ DELL Inspiron Resources

DELL HARDWARE DIAGNOSTICS

If your Dell system is having some bad day and you will try to isolate the problem the best thing you could do is run dell diagnostics. List below are the error and reason for a dell system failure.

Error Code Module Name Error Text
0200:xx02 adaptec.mdm %s called but not implemented.
0200:xx02 adaptec.mdm Adaptec module hung, cannot continue.
0200:xx02 adaptec.mdm Adapter hardware reset failed.
0200:xx02 adaptec.mdm AllocOSMIOB failed – Out of OSBIOB’s.
0200:xx02 adaptec.mdm Attempt to free memory not in the global memory table.
0200:xx02 adaptec.mdm Auto-Configuration failed.
0200:xx02 adaptec.mdm Cannot access the adapter hardware.
0200:xx02 adaptec.mdm Cannot allocate memory.
0200:xx02 adaptec.mdm Cannot locate the CPU service.
0200:xx02 adaptec.mdm Cannot locate the PCI service.
0200:xx02 adaptec.mdm Cannot locate the reserved memory service.
0200:xx02 adaptec.mdm Constructor failure – Insufficient memory to create device objects.
0200:xx02 adaptec.mdm Could not initialize the adapter.
0200:xx02 adaptec.mdm Found more than 100 controllers – aborting on assumed BIOS error.
0200:xx02 adaptec.mdm FreeOSMIOB passed a NULL pointer.
0200:xx02 adaptec.mdm Initialization code failed – Memory allocation failure at line %d.
0200:xx02 adaptec.mdm IOB reserved memory greater than 4096 bytes.
0200:xx02 adaptec.mdm Out of memory entries in the global memory table.
0200:xx02 adaptec.mdm Reserved memory pointer is NULL.
0200:xx02 adaptec.mdm The adapter is requesting more than 4096 bytes of memory.
0200:xx02 adaptec.mdm Unexpected error encountered : %s.
0300:xx02 ami_raid.mdm fCarveMemory called for %d bytes when only %d bytes are left.
0300:xx02 ami_raid.mdm Initialization code failed. Memory allocation failure at line %d.
0300:xx02 ami_raid.mdm Initialization code failed. Unable to allocate physical memory, only %d pages available.
0300:xx02 ami_raid.mdm Initialization code failed. Unable to map %X into data segment.
0300:xx19 ami_raid.mdm Battery failed: %s
0500:xx02 biosmp.mdm The BIOS MP service failed during initialization. Unable to allocate memory for %s.
0600:xx19 cables.mdm Checking the %s cable to be %s. Cable is currently: %s.
0600:xx1A cables.mdm Checking for detected state of Not Installed. For the %s cable: Expected: %s ; Found: %s .
0600:xx1B cables.mdm There was an error accessing the Super I/O registers for GPI’s.
0600:xx1C cables.mdm There is no valid entry in the test definition table for this test.
0600:xx1D cables.mdm Checking for : %s. Expected input pattern of 0x%04X. Read 0x%04X.
0600:xx1E cables.mdm Did not find a valid riser type for this chassis
0600:xx1F cables.mdm The -rt(list) parameter is required for this test
0600:xx20 cables.mdm Wrong motherboard for this chassis. Chassis : %s Expected motherboard SKU of %s
0600:xx21 cables.mdm Chassis to motherboard combination data is not valid. Processed an invalid pointer
0600:xx22 cables.mdm Chassis to motherboard combination data is incomplete. Ran out of table data before chassis and motherboard
combination was found.
0600:xx23 cables.mdm Chassis ID.
0600:xx24 cables.mdm The -chassis:(list) parameter is required for this test
0600:xx25 cables.mdm Checking for : %s. Expected input pattern of 0x%04X. Read 0x%04X.
0600:xx26 cables.mdm Did not find a valid chassis type for this platform.
0600:xx27 cables.mdm Hardware Detect Error – %s not detected.
0600:xx28 cables.mdm While testing %s, the user indicated the LED color was incorrect. Expected color was : %s
0600:xx29 cables.mdm While testing %s, the user indicated the LED operation was incorrect. Expected: %s
0600:xx2A cables.mdm Insufficient memory.
0700:xx02 cache.mdm Cache size is larger than available test region at line %d
0700:xx02 cache.mdm Cache sizing inconsistent at line %d
0700:xx02 cache.mdm Chipset specific support failed when sizing level 2 cache at line %d
0700:xx02 cache.mdm Error mapping system memory region at line %d
0700:xx02 cache.mdm Failure to create a cache test object at line %d
0700:xx02 cache.mdm Initialization failure. Detected Multiple L2 cache services.
0700:xx02 cache.mdm Initialization failure. L2 cache size is 0 at line %d
0700:xx02 cache.mdm Initialization failure. Unknown L1 organization (%d ways).
0700:xx02 cache.mdm Invalid L1/L2/L3 relationship. L1 size: %lX L2 size: %lX L3 size: %lX.
0700:xx02 cache.mdm Unable to allocate memory for %s.
0700:xx19 cache.mdm The cache improperly changed system memory during an ‘invalidate’ at line %d.
0700:xx1A cache.mdm Cache offset %08Xh miscompare at line %d.
0700:xx1B cache.mdm Level 1 cache failure. Cache offset %08Xh miscompared patterns %08Xh and %08Xh.
0700:xx1C cache.mdm Level 2 cache failure. Cache offset %08Xh miscompared patterns %08Xh and %08Xh during %s pass.
0700:xx1D cache.mdm Level 2 cache failure. Cache offset %08Xh miscompare during %s pass at line %d.
0700:xx1E cache.mdm Level 3 cache failure. Cache offset %08Xh miscompared patterns %08Xh and %08Xh during %s pass.
0700:xx1F cache.mdm Level 3 cache failure. Cache offset %08Xh miscompare during %s pass at line %d.
0B00:xx02 cpu.mdm ACPI table does not contain local APIC info.
0B00:xx02 cpu.mdm The CPU service failed during initialization. Unable to allocate memory for %s.
0B00:xx09 cpu.mdm CpuSvc: The timestamp counter has been reset!
0D00:xx02 ddinit.mim %%s %%s DIAGS 999 999 %%s DDINIT cInit DIAGS_INIT Fail Unable to load system module (%s).
0D00:xx02 ddinit.mim %s %s DIAGS 999 999 %s DDINIT cInit DIAGS_INIT Fail Unable to allocate memory.
0E00:xx02 dellsys.msm Callers buffer overlaps Trace Buffer!
0E00:xx02 dellsys.msm Invalid print buffer command in EMS.
0E00:xx02 dellsys.msm Invalid unit size value passed to EMS fTraceDump.
0E00:xx02 dellsys.msm Subtest called by non-existent main test.
0E00:xx02 dellsys.msm The Dell system module failed during initialization.
0E00:xx02 dellsys.msm This system is not recognized as a supported Dell PC. These diagnostics may not be run on unsupported systems.
0E00:xx02 dellsys.msm Unable to allocate memory for %s.
0E00:xx02 dellsys.msm Unable to map memory.
0E00:xx02 dellsys.msm Unable to record %s name (%s).
0E00:xx02 dellsys.msm Unable to remove %s name (%s).
0F00:xx00 disk.mdm Block %lu: %s (%s).
0F00:xx00 disk.mdm Block %lu: %s.
0F00:xx00 disk.mdm Device initialization failed. %s.
0F00:xx00 disk.mdm IDE device failed: %s (%s).
0F00:xx00 disk.mdm IDE device failed: %s.
0F00:xx00 disk.mdm IDE device failed: %s. Block %lu, Offset %lu – Data was 0x%02X, Should be 0x%02X.
0F00:xx00 disk.mdm Invalid block parameters, beginning block %lu may not be greater than ending block %lu.
0F00:xx00 disk.mdm Invalid disk block percent parameters, beginning value %u may not be greater than ending value %u.
0F00:xx02 disk.mdm Cannot add parameter %s. The parameter type %d is not supported in fAddIDEParams.
0F00:xx02 disk.mdm More than one device claimed the %s compatibility port.
0F00:xx02 disk.mdm Unable to allocate memory for %s.
0F00:xx06 disk.mdm A CD containing data tracks such as a software installation disk is needed for this test.
0F00:xx06 disk.mdm A formatable media must be inserted in the drive to complete this test.
0F00:xx06 disk.mdm A UDF formatted disc is needed for this test.
0F00:xx06 disk.mdm A writeable media must be inserted in the drive to complete this test.
0F00:xx06 disk.mdm An audio CD must be inserted in the drive to complete this test.
0F00:xx06 disk.mdm An erasable media must be inserted in the drive to complete this test.
0F00:xx06 disk.mdm Automatic Acoustic Management is not enabled.
0F00:xx06 disk.mdm Automatic Acoustic Management is not supported.
0F00:xx06 disk.mdm Cannot perform destructive write testing since logical partitions exist on the drive.
0F00:xx06 disk.mdm Cannot perform the test without user interaction.
0F00:xx06 disk.mdm S.M.A.R.T. disabled or not supported.
0F00:xx06 disk.mdm S.M.A.R.T. not supported.
0F00:xx06 disk.mdm The CD inserted in the drive does not contain any data tracks.
0F00:xx06 disk.mdm The command was aborted by the target device.
0F00:xx06 disk.mdm The device does not support this test.
0F00:xx06 disk.mdm The drive does not support play audio from files.
0F00:xx06 disk.mdm The host protected area feature set is not supported.
0F00:xx06 disk.mdm The internal buffer of drive is not large enough for the PCM audio file.
0F00:xx06 disk.mdm The S.M.A.R.T. offline test is not supported.
0F00:xx06 disk.mdm The seek command is not supported after ATA/ATAPI-6
0F00:xx06 disk.mdm This test is only supported on ATAPI devices.
0F00:xx06 disk.mdm Unknown test requested.
0F00:xx06 disk.mdm User chose not not format the media.
0F00:xx06 disk.mdm User chose not to overwrite the tape.
0F00:xx06 disk.mdm User chose not to run tests requiring removable media.
0F00:xx06 disk.mdm User chose not to write to the CD.
0F00:xx06 disk.mdm User must use headphones to continue testing.
0F00:xx19 disk.mdm Command was successful with some recovery action performed
0F00:xx1A disk.mdm Device is not ready
0F00:xx1B disk.mdm Flaw in media or an error in the recorded data. If this is a removable media device, retry the test with different media
0F00:xx1C disk.mdm Non-recoverable hardware error
0F00:xx1D disk.mdm Illegal request (Probably not a hardware problem). If this is a removable media device, retry with different media
0F00:xx1E disk.mdm Reset or media changed
0F00:xx1F disk.mdm Read was requested on a block that is protected
0F00:xx20 disk.mdm Blank check
0F00:xx21 disk.mdm Vendor specific error
0F00:xx22 disk.mdm Copy aborted
0F00:xx23 disk.mdm Aborted command
0F00:xx24 disk.mdm Equal
0F00:xx25 disk.mdm Volume overflow
0F00:xx26 disk.mdm Data compare error
0F00:xx27 disk.mdm Reserved for future use
0F00:xx28 disk.mdm Timeout waiting for drive not busy
0F00:xx29 disk.mdm Expected request for command
0F00:xx2A disk.mdm Expected request for data in
0F00:xx2B disk.mdm Expected request for data out
0F00:xx2C disk.mdm Data transfer count doesn’t match expected count
0F00:xx2D disk.mdm Not enough data was transferred
0F00:xx2E disk.mdm Illegal length indication
0F00:xx2F disk.mdm End of media detected
0F00:xx30 disk.mdm Media change requested
0F00:xx31 disk.mdm An unknown error occurred
0F00:xx32 disk.mdm Timeout waiting for IRQ
0F00:xx33 disk.mdm Timeout waiting for DRQ to be deasserted
0F00:xx34 disk.mdm Timeout waiting for DRDY to be asserted
0F00:xx35 disk.mdm Unknown diagnostic failure
0F00:xx36 disk.mdm Formatter device error
0F00:xx37 disk.mdm Sector buffer error
0F00:xx38 disk.mdm ECC circuitry error
0F00:xx39 disk.mdm Microprocessor error
0F00:xx3A disk.mdm Specified audio track not found
0F00:xx3B disk.mdm No audio output
0F00:xx3C disk.mdm Cannot perform the test, the media is blank, unreadable or not present
0F00:xx3D disk.mdm Incompatible CD or DVD for testing
0F00:xx3E disk.mdm A possible failure is predicted by the drive’s SMART status. It is advisable to immediately back up your data
0F00:xx3F disk.mdm User aborted the test
0F00:xx40 disk.mdm Address mark not found or media error
0F00:xx41 disk.mdm No media in removable media device
0F00:xx42 disk.mdm Address not found
0F00:xx43 disk.mdm Media changed
0F00:xx44 disk.mdm Uncorrectable data error or media is write protected
0F00:xx45 disk.mdm Ultra DMA CRC error detected
0F00:xx46 disk.mdm Drive failed to detect an ECC error
0F00:xx47 disk.mdm Timeout waiting for DSC to be asserted
0F00:xx48 disk.mdm Target drive aborted the command
0F00:xx49 disk.mdm A target or master abort was encountered while transferring data
0F00:xx4A disk.mdm S.M.A.R.T. off-line data collection was never started
0F00:xx4B disk.mdm S.M.A.R.T. off-line data collection was suspended by a host command
0F00:xx4C disk.mdm S.M.A.R.T. off-line data collection was aborted by a host command
0F00:xx4D disk.mdm S.M.A.R.T. off-line data collection was aborted by a fatal error
0F00:xx4E disk.mdm Unknown S.M.A.R.T. off-line data collection status
0F00:xx4F disk.mdm Device Address or Command Select (DA, CS0-) signals are not working
0F00:xx50 disk.mdm Control Select (CS1-) signal is not working
0F00:xx51 disk.mdm The Interrupt Request (INTRQ-) signal is not working
0F00:xx52 disk.mdm The Data signals (DD) are not working
0F00:xx53 disk.mdm A PIO transfer failed. The IORDY signal may not be working correctly
0F00:xx54 disk.mdm The Passed Diagnostics (PDIAG-) signal was not detected
0F00:xx55 disk.mdm Too much data was transferred
0F00:xx56 disk.mdm The removable media in the drive does not match the requested density
0F00:xx57 disk.mdm The self-test routine was aborted by the host
0F00:xx58 disk.mdm The self-test routine was aborted by the host with a hard or soft reset
0F00:xx59 disk.mdm A fatal or unknown error occurred during the self-test routine
0F00:xx5A disk.mdm The self-test failed for an unknown reason
0F00:xx5B disk.mdm The self-test failed the electrical portion of the test
0F00:xx5C disk.mdm The self-test failed the servo portion of the test
0F00:xx5D disk.mdm The self-test failed the read portion of the test
0F00:xx5E disk.mdm An invalid status value was returned by the self-test
0F00:xx5F disk.mdm ATAPI devices do not support the identify device command
0F00:xx60 disk.mdm Timeout waiting for DRQ to be asserted
0F00:xx61 disk.mdm An 80-pin Ultra DMA 66/100 cable was not detected
0F00:xx62 disk.mdm Device initialization failed
0F00:xx63 disk.mdm Error reading logging information
0F00:xx64 disk.mdm Prior DST failure logged in the SMART self-test log
0F00:xx65 disk.mdm IDE CD-RW/DVD+RW format test failed
0F00:xx66 disk.mdm The self-test code took an unexpected path
0F00:xx67 disk.mdm The self-test took too long to run
0F00:xx68 disk.mdm CHS mode is not supported
0F00:xx69 disk.mdm Media is copy protected
0F00:xx6A disk.mdm The requested maximum size is larger than the native drive size
0F00:xx6B disk.mdm Ending block %lu may not be greater than end of physical device %lu
0F00:xx6C disk.mdm Starting block %lu may not be greater than ending block %lu
0F00:xx6D disk.mdm The user specified track is not valid for the disc in the drive
0F00:xx6E disk.mdm The table of contents for the inserted disc is too large to read into memory
0F00:xx6F disk.mdm Cannot use this disc for testing. Please insert another Data disc and try again
0F00:xx70 disk.mdm Optical drive BIST — OPU test failed. Make sure there is no media in the drive.
0F00:xx71 disk.mdm Optical drive BIST — DRAM test failed.
0F00:xx72 disk.mdm Optical drive BIST — Controller (main IC) test failed.
0F00:xx73 disk.mdm Optical drive BIST — FLASH ROM test failed.
0F00:xx74 disk.mdm Optical drive BIST — Tray In test failed. Check for obstruction.
0F00:xx75 disk.mdm Optical drive BIST — Tray Out test failed. Check for obstruction.
0F00:xx76 disk.mdm Optical drive BIST — Spindle test failed.
0F00:xx77 disk.mdm Optical drive BIST is not supported by this drive.
0F00:xx78 disk.mdm Drive total logical blocks %ld is in between defined sizes %ld \”%s\” and %ld \”%s\”
0F00:xx79 disk.mdm Failed to set AAM level. Expected value = 0x%02X, actual value = 0x%02X
0F00:xx7A disk.mdm The length of the feature buffer is too small, must be at least 4 bytes
0F00:xx7B disk.mdm Blank media or no media is present in optical drive. Test requires media with data (Resource CD, Installation CD)
0F00:xx7C disk.mdm The media is still in the device
0F00:xx7D disk.mdm The tray of optical device is not out.
0F00:xx7E disk.mdm Media contains audio data only. Test requires media with data tracks (Resource CD, Installation CD)
1100:xx00 diskette.mdm The test may not be run because the device does not support the change line detection feature.
1100:xx02 diskette.mdm An invalid parameter selection index of %d was specified in file %s, at line:%d.
1100:xx02 diskette.mdm An invalid test selection index of %d was specified in file %s, at line:%d.
1100:xx02 diskette.mdm Attempted to create an error description of a successful BIOS status.
1100:xx02 diskette.mdm Data comparison was requested for %u blocks, actual block sizes are %u and %u.
1100:xx02 diskette.mdm Diskette data buffer expected but not supplied in %s, at line %d.
1100:xx02 diskette.mdm Diskette drive test function entered without a system test context established.
1100:xx02 diskette.mdm Memory Allocation Error. Unable to allocate %s object
1100:xx02 diskette.mdm Unable to allocate a real mode addressable memory buffer of %u bytes.
1100:xx02 diskette.mdm Unable to allocate memory for a \”%s\” object of size %u bytes in %s, at line %d.
1100:xx19 diskette.mdm The value for the %s parameter (%u) may not be greater than the value for the %s parameter (%u).
1100:xx1A diskette.mdm The value for the \”%s\” (\”%s\”) (%u) may not be less than the minium value of %u.
1100:xx1B diskette.mdm The value for the \”%s\” (\”%s\”) (%u) may not be greater than the maximum value of %u.
1100:xx1C diskette.mdm The change line test has been failed at the user’s instruction.
1100:xx1D diskette.mdm The expected change line event was not detected.
1100:xx1E diskette.mdm The test was ended by user request.
1100:xx1F diskette.mdm The data written to and read back from the diskette media are not equivalent as expected. The diskette should be considered
corrupted.
1100:xx20 diskette.mdm The cylinder parameters are not compatible with the device’s cylinder range.
1100:xx21 diskette.mdm A system disk BIOS operation failed with the error code of %2.2Xh.
1100:xx22 diskette.mdm The system’s BIOS reported a \”Bad command\” status in response to the command code %2.2Xh
1100:xx23 diskette.mdm The system BIOS reported an access failure on the diskette media. Write-protection on the diskette should be disabled
and the test retried.
1100:xx24 diskette.mdm The BIOS could not operate on the location at %s, which may specify an invalid position for the diskette drive or media.
1100:xx25 diskette.mdm A status code returned by the BIOS indicates a device reset failure.
1100:xx26 diskette.mdm An uncorrectable Cyclic Redundancy Check (CRC) or Error Code Correction (ECC) data error occurred on the media at %s.
1100:xx27 diskette.mdm The BIOS reported that a correctable (soft) data error occurred on the diskette, which indicates that redundant
error code information was sufficient to correct the error.
1100:xx28 diskette.mdm The system’s BIOS status indicates that the diskette controller (a microprocessor which controls the diskette drive)
failed to operate correctly.
1100:xx29 diskette.mdm The BIOS status indicates the the seek operation (positioning the drive’s heads to location %s) failed.
1100:xx2A diskette.mdm The drive did not respond in a fixed time to an access attempt.
1100:xx2B diskette.mdm This test is checking for media in the drive. Verify media was not write-protected and was properly inserted into the drive.
1100:xx2C diskette.mdm This test is checking that media has been removed from the drive. Verify media was removed from the drive.
1400:xx02 dvd.mdm Initialization failure. Unable to allocate memory for %s.
1400:xx19 dvd.mdm Unable to read interrupt from PCI Configuration space.
1B00:xx19 genaudio.mdm Could not create the Audio CD service object.
1B00:xx19 genaudio.mdm Could not create the Crystal Audio Module object
1B00:xx1A genaudio.mdm Could not create the \”%s\” help object.
1B00:xx1B genaudio.mdm The user’s response indicated a failure.
1B00:xx1C genaudio.mdm Insufficient memory.
1B00:xx1E genaudio.mdm Was unable to initialize the hardware for playback.
1B00:xx1F genaudio.mdm Audio synthesized tone sound was not heard.
1B00:xx20 genaudio.mdm Audio analog playback was not heard.
1B00:xx21 genaudio.mdm Audio from the line input was not heard.
1B00:xx22 genaudio.mdm Audio volume controls do not appear to be functioning.
1B00:xx23 genaudio.mdm Recorded audio was not heard.
1B00:xx24 genaudio.mdm Audio Invalid Base Address.
1B00:xx25 genaudio.mdm The audio controller did not generate any interrupts from its internal timer.
1B00:xx26 genaudio.mdm The audio controller generated an incorrect number of interrupts from its internal timer.
1B00:xx27 genaudio.mdm Expected to generate %u interrupts, actually generated %u.
1B00:xx29 genaudio.mdm At least one of the playback channel parameters (left, right, and both) must be set to \”Yes\”.
1B00:xx2A genaudio.mdm Not able to set volume.
1B00:xx2B genaudio.mdm Not able to set master volume.
1B00:xx2C genaudio.mdm Audio service reported an error while reporting the number of speakers on the system.
1B00:xx2D genaudio.mdm The audio service (fGetNumOfSpeakers) reported an error.
1B00:xx2E genaudio.mdm CDROM track did not match expected characteristics
1B00:xx2F genaudio.mdm Analysis did not find a Frequency point of 9000 Hz. Verify CD audio cable is attached between CD-drive and CD-in
connector on system board.
1B00:xx30 genaudio.mdm Power at 9000 Hz less than 2 percent
1B00:xx31 genaudio.mdm Power at Secondary Frequency greater than 1 percent
1B00:xx32 genaudio.mdm CDROM Service failed
1B00:xx33 genaudio.mdm CDROM device not found. CDROM device may not be enabled in system setup, wrong device requested for this test,
or CD-drive IDE cable is not connected.
1B00:xx34 genaudio.mdm The user indicates that no message was heard.
1B00:xx35 genaudio.mdm User has cancelled the test.
1B00:xx36 genaudio.mdm Failed to generate the wave for playing
1B00:xx37 genaudio.mdm The recorded wave information does not match with the source wave information.
1B00:xx38 genaudio.mdm Failed to analyze the recorded wave information
1B00:xx39 genaudio.mdm Analysis did not find the peak power point to also be the frequency point of 9000 Hz.
1B00:xx3A genaudio.mdm Check cable to internal microphone. Analysis says that Right Channel is bad.
1B00:xx3B genaudio.mdm Check cable to internal microphone. Analysis says that Left Channel is bad.
1B00:xx3C genaudio.mdm Check cable to internal microphone. Analysis says that Both (left/right) Channels are bad.
2200:xx64 iaudio.mdm A timeout occurred while trying to access an AC97 register.
2200:xx65 iaudio.mdm Read %Xh at AC97 register %Xh, expected %Xh.
2200:xx65 iaudio.mdm The hub (SB/ICH) AC’97 audio service failed during initialization.
2200:xx66 iaudio.mdm A timeout occurred while waiting for the audio controller to generate a record interrupt.
2200:xx66 iaudio.mdm Unable to allocate memory for %s.
2200:xx67 iaudio.mdm A timeout occurred while waiting for the audio controller to generate a playback interrupt.
2200:xx68 iaudio.mdm A timeout occurred while waiting for the audio controller to generate an interrupt.
2200:xx69 iaudio.mdm A wave file parameter is not supported by this service.
2200:xx6A iaudio.mdm Primary codec is not ready.
2200:xx6B iaudio.mdm Not enough buffer size
2200:xx6C iaudio.mdm A timeout occurred while trying to access AC97 CODEC register %Xh.
2300:xx02 ieee1394.mdm Initialization failure. Unable to allocate memory for %s.
2300:xx1F ieee1394.mdm Invalid bus identification content. Expected %Xh but found %Xh.
2300:xx20 ieee1394.mdm ATRQ command register access failed. Expected %Xh but found %Xh.
2300:xx21 ieee1394.mdm PHY register reading times out.
2300:xx22 ieee1394.mdm PHY register writing times out.
2300:xx23 ieee1394.mdm PHY register access failed. Expected %Xh but found %Xh.
2300:xx24 ieee1394.mdm Invalid interrupt count. Expected %Xh but found %Xh.
2400:xx02 imchecc.mdm Failed to allocate memory for the IMchEcc module.
2400:xx02 imchecc.mdm Illegal function call.
2400:xx02 imchecc.mdm Line %d. Illegal attempt to modify register without restoring original value first.
2400:xx02 imchecc.mdm Line %d. Illegal attempt to restore register without first saving the initial state.
2600:xx02 ioapic.mdm %d paragraphs of memory are available below 1 MB and the test needs %d paragraphs.
2600:xx02 ioapic.mdm Initialization failure. Unable to allocate memory for %s.
2600:xx02 ioapic.mdm Unable to reserve GDT entry for code usage.
2600:xx19 ioapic.mdm Unable to set I/O APIC ID. Tried to set the ID to %02Xh, but it read back as %02Xh.
2600:xx1A ioapic.mdm Unexpected interrupt found. Interrupt %02Xh occurred at address %04X:%08Xh (offset %04Xh in the module).
2600:xx1B ioapic.mdm Wrong interrupt count. Attempted to generate %d interrupts, but %d were generated.
2600:xx1C ioapic.mdm Auxiliary processor has failed. CPU (%02Xh) did not transition to protected mode.
2600:xx1D ioapic.mdm Auxiliary processor has failed. Unable to issue STARTUP message to CPU (%02Xh).
2600:xx1E ioapic.mdm Auxiliary processor has failed. Unable to issue INIT message to CPU (%02Xh).
2600:xx1F ioapic.mdm Unable to relocate the code to start the other processors to below 1 MB.
2600:xx20 ioapic.mdm Auxiliary processor has failed. CPU (%02Xh) failed to respond.
2600:xx21 ioapic.mdm Internal program error. No space left in the control tables to manage an additional CPU.
2600:xx22 ioapic.mdm Unable to stop non-boot processors. The system might be unstable and should be rebooted.
2600:xx23 ioapic.mdm Auxiliary processor has failed. Unable to send a command to CPU %02Xh.
2600:xx24 ioapic.mdm Auxiliary processor has failed. Unable to get a result from CPU %02Xh.
2600:xx25 ioapic.mdm Realtime clock divider chain setting is wrong and the RTC cannot be used for timing.
2600:xx26 ioapic.mdm Internal program error. Unable to locate the CPU with APIC ID %02Xh in the control tables.
2600:xx27 ioapic.mdm Internal program error. Code segment corruption was detected.
2600:xx28 ioapic.mdm Internal program error. Unknown error (%02Xh) during the test.
2600:xx29 ioapic.mdm Unable to create memory mapping for I/O APIC or the local APIC.
2A00:xx02 ir.mdm Initialization failure. Unable to allocate memory for %s.
2A00:xx19 ir.mdm IR port is not working properly. Failed checking UART INT_EN reg static bits.
2A00:xx1A ir.mdm IR port is not working properly. Failed checking UART INT_ID reg static bits.
2A00:xx1B ir.mdm IR port is not working properly. Failed checking MCR reg static bits.
2A00:xx1C ir.mdm IR port is not working properly. Failed clearing LSR bits.
2A00:xx1D ir.mdm IR port is not working properly. Failed clearing MSR bits.
2A00:xx1E ir.mdm IR port is not working properly. Failed checking IID static bits.
2A00:xx1F ir.mdm IR port is not working properly. Failed checking THRE & TXMT bits in LSR.
2A00:xx20 ir.mdm IR port is not working properly. Failed basic Scratch Reg test.
2A00:xx21 ir.mdm IR port is not working properly. Found UART, but not 550A.
2A00:xx22 ir.mdm IR port is not working properly. Failed complete scratch reg test.
2A00:xx23 ir.mdm IR port is not working properly. No interrupt received.
2A00:xx24 ir.mdm IR port is not working properly. Timeout waiting for Tx to empty.
2A00:xx25 ir.mdm IR port is not working properly. Failed trying to empty Rx.
2A00:xx26 ir.mdm IR port is not working properly. Timed out waiting for 0x%02X loopBack.
2A00:xx27 ir.mdm IR port is not working properly. After Tx=0x%02X, Rx=0x%02X, failed test.
2A00:xx28 ir.mdm IR port is not working properly. Invalid frame size received exp=%d rcv=%d loop=%d.
2A00:xx29 ir.mdm IR port is not working properly. Invalid data received exp=%x rcv=%x index=%d loop=%d.
2A00:xx2A ir.mdm IR port is not working properly. Invalid frame size %d.
2A00:xx2B ir.mdm IR port is not working properly. Send frame failed, THRE timeout.
2A00:xx2C ir.mdm IR port is not working properly. Send frame failed, TEMT timeout.
2A00:xx2D ir.mdm IR port is not working properly. Failed reading SMC_ID_HI, data = 0x%02X, s/b 0×10.
2A00:xx2E ir.mdm IR port is not working properly. Failed reading SMC_ID_LO, data = 0x%02X, s/b 0xB8.
2A00:xx2F ir.mdm IR port is not working properly. Failed reading CHIP_ID, data = 0x%02X, s/b 0xF1 or 0xF2.
2A00:xx30 ir.mdm IR port is not working properly. No interrupt received.
2A00:xx31 ir.mdm IR port is not working properly. Failed checking BofLow reg., data = 0x%02X.
2A00:xx32 ir.mdm IR port is not working properly. FIFO not empty after reset!.
2A00:xx33 ir.mdm IR port is not working properly. FIFO full early, count=%d.
2A00:xx34 ir.mdm IR port is not working properly. FIFO not full after 128 bytes.
2A00:xx35 ir.mdm IR port is not working properly. Failed reading back FIFO got 0x%02X, s/b 0x%02X.
2A00:xx36 ir.mdm IR port is not working properly. FIFO empty early, count=%d.
2A00:xx37 ir.mdm IR port is not working properly. FIFO not empty after 128 bytes.
2A00:xx38 ir.mdm IR port is not working properly. DMA channel not configured by BIOS.
2A00:xx39 ir.mdm IR port is not working properly. Failed, could not allocate DMA buffer.
2A00:xx3A ir.mdm IR port is not working properly. Failed, DmaSize=%d, s/b %d.
2A00:xx3B ir.mdm IR port is not working properly. Failed, byte %d = 0x%02X, s/b 0x%02X.
2A00:xx3C ir.mdm IR port is not working properly. Failed, fifo full @ i=%d.
2A00:xx3D ir.mdm IR port is not working properly. Timed out waiting for EOM, i=%d.
2A00:xx3E ir.mdm IR port is not working properly. Failed, MsgCnt = %d.
2A00:xx3F ir.mdm IR port is not working properly. Failed, fifo empty @ i=%d.
2A00:xx40 ir.mdm IR port is not working properly. Failed, bad data = 0x%02X, s/b i=0x%02X.
2A00:xx41 ir.mdm IR port is not working properly. Failed, fifo NOT empty at end of test.
2A00:xx42 ir.mdm IR port is not working properly. Failed, LSR = 0x%02X.
2A00:xx43 ir.mdm IR port is not working properly. Failed, could not allocate DMA buffer.
2A00:xx44 ir.mdm IR port is not working properly. Invalid frame size received exp=%d rcv=%d loop=%d.
2A00:xx45 ir.mdm IR port is not working properly. Invalid data received exp=%x rcv=%x index=%d loop=%d.
2A00:xx46 ir.mdm IR port is not working properly. Failed, could not allocate DMA buffer.
2A00:xx47 ir.mdm IR port is not working properly. Invalid frame size %d.
2A00:xx48 ir.mdm IR port is not working properly. Transmit EOM timeout.
2A00:xx49 ir.mdm IR port is not working properly. Transmit message count error.
2A00:xx4A ir.mdm IR port is not working properly. Transmit line status register error, LSR=%x.
2A00:xx4B ir.mdm IR port is not working properly. Receiver timeout waiting for frame.
2A00:xx4C ir.mdm IR port is not working properly. Rx message count error.
2A00:xx4D ir.mdm IR port is not working properly. Rx FIFO timeout.
2A00:xx4E ir.mdm IR port is not working properly. Rx line status register error, LSR=%x.
2A00:xx4F ir.mdm IR port is not working properly. Invalid host test code %d.
2A00:xx50 ir.mdm IR port is not working properly. Communication could not be established with host.
2A00:xx51 ir.mdm IR port is not working properly. Invalid IRQ %d.
2A00:xx52 ir.mdm IR port is not working properly. Failed, DMA buffer pointer not setup.
2A00:xx53 ir.mdm IR port is not working properly. Failed, invalid DMA channel %d.
2A00:xx54 ir.mdm IR port is not working properly. Failed, invalid DMA count %d.
2C00:xx02 keyboard.mdm Unable to allocate memory for %s.
2C00:xx19 keyboard.mdm Unable to read keyboard %s port. Read 0xFFFF from the port.
2C00:xx1A keyboard.mdm Unable to read keyboard test inputs. A read of the keyboard controller’s test port returned all ones.
2C00:xx1B keyboard.mdm The user indicated that the results of the test were unsatisfactory.
2C00:xx1C keyboard.mdm The test was stopped before all keys on the keyboard were pressed.
2C00:xx1D keyboard.mdm Stuck key detected. The keyboard is continuously transmitting a scan code of %Xh.
2C00:xx1E keyboard.mdm Keyboard wizard had trouble communication with the output file.
2C00:xx1F keyboard.mdm No hot keys detected.
2C00:xx20 keyboard.mdm The user exceeded the maximum number of retries allowed.
2C00:xx21 keyboard.mdm Stuck key detected. The keyboard is continuously transmitting a scan code.
2C00:xx22 keyboard.mdm Wireless keyboard not docked.
2C00:xx23 keyboard.mdm Error retreiving docked status of wireless keyboard.
2C00:xx24 keyboard.mdm The user indicated the %s LED was not functioning.
2C00:xx25 keyboard.mdm Env var kbleds set to invalid value
2F00:xx02 memory.mdm Allocated memory was found to be unreliable.
2F00:xx02 memory.mdm Failed to allocate memory for a test buffer.
2F00:xx02 memory.mdm Failed to allocate memory for copy of test block.
2F00:xx02 memory.mdm Failed to allocate memory for relocation of test code.
2F00:xx02 memory.mdm Failed to allocate memory for relocation of the LDT.
2F00:xx02 memory.mdm Failed to allocate memory for the channel mode parameter.
2F00:xx02 memory.mdm Failed to allocate memory for the Channel Mode test.
2F00:xx02 memory.mdm Failed to allocate memory for the DIMM Temperature test.
2F00:xx02 memory.mdm Failed to allocate memory for the dual channel parameter.
2F00:xx02 memory.mdm Failed to allocate memory for the Dual Channel test.
2F00:xx02 memory.mdm Failed to allocate memory for the memory device.
2F00:xx02 memory.mdm Failed to allocate memory for the memory module.
2F00:xx02 memory.mdm Failed to allocate memory for the memory temperature parameter.
2F00:xx02 memory.mdm Failed to allocate memory for the Memory Test Services.
2F00:xx02 memory.mdm Failed to allocate memory for the table of available memory blocks.
2F00:xx02 memory.mdm Failed to allocate memory for the TLB cache page memory blocks.
2F00:xx02 memory.mdm Failed to allocate real memory.
2F00:xx02 memory.mdm Memory sizing error reported by BIOS.
2F00:xx02 memory.mdm Required service, %s, not found.
2F00:xx02 memory.mdm Unable to locate table of available memory blocks.
2F00:xx02 memory.mdm Unable to locate the memory controller device.
2F00:xx1D memory.mdm Memory is not operating in the expected channel mode
2F00:xx1E memory.mdm Memory temperature exceeds the specified threshold
3100:xx02 miscpci.mdm Device initialization failure. Unable to allocate memory for %s at line %d.
3100:xx19 miscpci.mdm No BIOS support for SMI interface function.
3100:xx1A miscpci.mdm Required parameter does not exist.
3100:xx1B miscpci.mdm Expected: VID = %x DID = %x Found: VID = %x DID = %x.
3500:xx01 mouse.mdm The user has requested an abort of the currently executing test.
3500:xx02 mouse.mdm %s: Can not locate %s (%d)
3500:xx02 mouse.mdm Memory allocation failure creating %s.
3500:xx03 mouse.mdm Unknown mouse type. The test was called with an unknown type of %Xh.
3500:xx06 mouse.mdm This test must be run in interactive mode.
3500:xx19 mouse.mdm Could not disable mouse. The keyboard controller did not acknowledge a mouse disable command.
3500:xx1A mouse.mdm Could not disable keyboard. The keyboard controller did not acknowledge a keyboard disable command.
3500:xx1B mouse.mdm Could not set sampling rate. The keyboard controller did not accept a command to set the mouse’s data sampling rate.
3500:xx1C mouse.mdm Could not enable mouse. The keyboard controller did not acknowledge a mouse enable command.
3500:xx1D mouse.mdm Could not enable keyboard. The keyboard controller did not acknowledge a keyboard enable command.
3500:xx1E mouse.mdm A parity error was detected. The keyboard controller status indicates a data parity (corrupted data) error.
3500:xx1F mouse.mdm Keyboard transmit timeout error. The keyboard controller failed to accept data within 0.0%u seconds.
3500:xx20 mouse.mdm Keyboard receive timeout error. The keyboard controller failed to receive data within 0.0%u seconds.
3500:xx21 mouse.mdm Timer expired before any keyboard or mouse data was found.
3500:xx22 mouse.mdm Both buttons were detected as pressed.
3600:xx02 nbbatt.mdm Initialization failure. Unable to allocate memory for %s.
3600:xx02 nbbatt.mdm Unable to map data buffer local.
3600:xx1A nbbatt.mdm Battery test failed – Charger should be shown as charging battery.
3600:xx1B nbbatt.mdm Battery test failed – Charger should not be shown as charging battery.
3600:xx22 nbbatt.mdm Battery test failed – reporting disconnected charger.
3600:xx23 nbbatt.mdm Battery test failed – reporting attached charger.
3600:xx29 nbbatt.mdm Reporting connected charger.
3600:xx33 nbbatt.mdm Error reported while communicating with the battery.
3600:xx3D nbbatt.mdm Battery register Error reported.
3600:xx3E nbbatt.mdm Invalid Battery register specified.
3600:xx47 nbbatt.mdm Read AC adaptor function not supported.
3600:xx49 nbbatt.mdm Invalid AC adaptor reported.
3600:xx4A nbbatt.mdm Invalid AC adaptor function specified.
3600:xx51 nbbatt.mdm Error reported while communicating with SMBIOS service.
3600:xx52 nbbatt.mdm Permanent battery failure detected.
3600:xx53 nbbatt.mdm Battery can no longer provide sufficient power to your system.
3600:xx5B nbbatt.mdm Battery currently not charging.
3700:xx02 nbfan.mdm %s: Can not locate %s (%d)
3700:xx02 nbfan.mdm Initialization failure. Unable to allocate memory for %s.
3700:xx19 nbfan.mdm Fan not running at correct speed or fan sensor incorrect
3700:xx1A nbfan.mdm Fan test failed for fan %s. Reason: %s
3700:xx1B nbfan.mdm Expected %s %s RPM of %d. Detected fan RPM = %d.
3700:xx1C nbfan.mdm For %s : Invalid fan RPM detected. Detected fan RPM = %d.
3700:xx1D nbfan.mdm Currently %s RPM exceeds limit value. Detected fan RPM = %d, limit fan RPM = %d
3800:xx02 nbsvc.mdm %s: All required structures are not supported
3800:xx02 nbsvc.mdm %s: Can not locate %s (%d)
3800:xx02 nbsvc.mdm %s: Unrecognized Interface Version of %x.
3800:xx02 nbsvc.mdm Initialization failure. Unable to allocate memory for %s.
3900:xx02 nbtherm.mdm %s: Can not locate %s (%d)
3900:xx02 nbtherm.mdm Initialization failure. Unable to allocate memory for %s.
3900:xx25 nbtherm.mdm Time-out waiting for %dC temperature decrease, startTemp=%dC, lastTemp=%dC
3900:xx26 nbtherm.mdm Temperature sensor out of range, temp=%dC, min=%dC, max=%dC
3900:xx27 nbtherm.mdm Maximum temperature increase of %dC exceeded, startTemp=%dC, lastTemp=%dC
3900:xx28 nbtherm.mdm System is clock throttled.
3900:xx29 nbtherm.mdm Temperature sensor did not change value during test.
3900:xx2A nbtherm.mdm CPU is clock throttled.
3900:xx2B nbtherm.mdm The throttle parameter is incompatible with this CPU.
3900:xx2C nbtherm.mdm Maximum allowable temperature of %3dC reached.
3900:xx2D nbtherm.mdm The safe temperature of %3dC reached.
3B00:xx02 nic.mdm Adapter is not 10Base-T or 100Base-TX.
3B00:xx02 nic.mdm Adapter is not 10Base-T.
3B00:xx02 nic.mdm Bus Mastering disabled.
3B00:xx02 nic.mdm Initialization failure. Unable to allocate memory for %s.
3B00:xx19 nic.mdm Invalid manufacturer code. Expected %Xh but found %Xh.
3B00:xx1A nic.mdm Invalid device ID. Expected %Xh but found %Xh.
3B00:xx1B nic.mdm Word I/O failed for data pattern. Expected %Xh but found %Xh.
3B00:xx1C nic.mdm Byte I/O failed for data pattern %Xh. Expected %Xh but found %Xh.
3B00:xx1D nic.mdm Window change failed. Unable to select window %d.
3B00:xx1E nic.mdm Fast read of alternate value failed.
3B00:xx1F nic.mdm Station address register test failed.
3B00:xx20 nic.mdm EEPROM failure detected. Expected a ‘data’ checksum of %Xh but found %Xh.
3B00:xx21 nic.mdm EEPROM failure detected. Expected a ’secondary data’ checksum of %Xh but found %Xh.
3B00:xx22 nic.mdm EEPROM failure detected. Expected a ‘config’ checksum of %Xh but found %Xh.
3B00:xx23 nic.mdm EEPROM failure detected. Expected a ’secondary config’ checksum of %Xh but found %Xh.
3B00:xx24 nic.mdm Invalid interrupt count. Expected %Xh but found %Xh.
3B00:xx25 nic.mdm MII physical layer failed. Register %Xh access failed, value=%Xh.
3B00:xx26 nic.mdm MII physical layer failed. Reset timeout.
3B00:xx27 nic.mdm MII physical layer failed. Reset failed, control register %Xh.
3B00:xx28 nic.mdm MII physical layer failed. Expected: %Xh Actual: %Xh Register: %Xh.
3B00:xx29 nic.mdm Receive frame failed. Data does not match the transmit frame (size=%d).
3B00:xx2A nic.mdm Non-specific adapter failure. Status register has a generic Fail bit set.
3B00:xx2B nic.mdm Transmit frame failed. Timeout, size=%d, STATUS=%Xh.
3B00:xx2C nic.mdm Transmit frame failed. Jabber error.
3B00:xx2D nic.mdm Transmit frame failed. Underrun error.
3B00:xx2E nic.mdm Transmit frame failed. Maximum collisions reached.
3B00:xx2F nic.mdm Transmit frame failed. Status overflow.
3B00:xx30 nic.mdm Receive frame failed. Timeout, size=%d, STATUS=%Xh.
3B00:xx31 nic.mdm Receive frame failed. Receiver error (size=%d, RX_STATUS=%Xh, RX_ERROR=%Xh).
3B00:xx32 nic.mdm Receive frame failed. Invalid size, expected %d, but received %d.
3B00:xx33 nic.mdm Width test failed. No room in adapter FIFO.
3B00:xx34 nic.mdm Width test failed. Timeout.
3B00:xx35 nic.mdm Width test failed. Invalid size.
3B00:xx36 nic.mdm Width test failed. Invalid data.
3B00:xx37 nic.mdm Pattern test failed. No room in adapter FIFO.
3B00:xx38 nic.mdm Pattern test failed. Timeout.
3B00:xx39 nic.mdm Pattern test failed. Invalid size.
3B00:xx3A nic.mdm Pattern test failed. Invalid data.
3B00:xx3B nic.mdm Non-specific adapter failure. Low level code %d.
3B00:xx3C nic.mdm Low level error adapter failure. Adapter command timeout error.
3B00:xx3D nic.mdm Low level error adapter failure. EEPROM access timeout error.
3B00:xx3E nic.mdm Low level error adapter failure. EEPROM product ID is mismatched with physical layer card.
3B00:xx3F nic.mdm Low level error adapter failure. MII physical layer not responding.
3B00:xx40 nic.mdm Invalid adapter configuration. The adapter was marked ‘bad’ during initialization.
3B00:xx41 nic.mdm Invalid adapter configuration. EISA adapter in ISA machine.
3B00:xx42 nic.mdm Transmit frame failed. No room in adapter FIFO.
3B00:xx43 nic.mdm Transmit frame failed. Timeout waiting for data to transmit.
3B00:xx44 nic.mdm Unable to issue a command to the adapter. Command %04Xh returned a code of %d.
3B00:xx45 nic.mdm Adapter failed to complete a command. Download to fifo failed to complete.
3B00:xx46 nic.mdm Adapter failed to complete a command. Data not looped back to receive FIFO.
3B00:xx47 nic.mdm Adapter failed to complete a command. Upload from fifo failed to complete.
3B00:xx48 nic.mdm Receive frame failed. Incomplete packet received.
3B00:xx49 nic.mdm Receive frame failed. Unknown receiver error.
3B00:xx4A nic.mdm Receive frame failed. Overrun error.
3B00:xx4B nic.mdm Receive frame failed. Oversize error.
3B00:xx4C nic.mdm Receive frame failed. Undersize error.
3B00:xx4D nic.mdm Receive frame failed. Framing error.
3B00:xx4E nic.mdm Receive frame failed. CRC error.
3B00:xx4F nic.mdm Receive frame failed, overflow status.
3B00:xx50 nic.mdm Transmit frame failed. No room in FIFO, size=%d.
3B00:xx51 nic.mdm Pattern test failed. Register %s Expected: %Xh Actual: %Xh.
3B00:xx52 nic.mdm Command failure. SRPR register bank %d select failed (%Xh).
3B00:xx53 nic.mdm Pattern test failed. %s stuck bits after reset (%Xh).
3B00:xx54 nic.mdm Pattern test failed. UISR_EV stuck interrupt bits after reset (%Xh).
3B00:xx55 nic.mdm Interrupt failure. Access error interrupt to register failed (error=%d).
3B00:xx56 nic.mdm Interrupt failure. Access error interrupt to shared RAM failed (error=%d).
3B00:xx57 nic.mdm Interrupt failure. Timer interrupt failed (error=%d).
3B00:xx58 nic.mdm Pattern test failed. Expected %Xh and found %Xh at %X:%Xh.
3B00:xx59 nic.mdm Adapter ‘Open’ failed. No interrupt, error=%d.
3B00:xx5A nic.mdm Adapter ‘Open’ failed. Retcode=%Xh, error_code=%Xh.
3B00:xx5B nic.mdm Receive frame failed. Error=%d.
3B00:xx5C nic.mdm Receive frame failed. Retcode=%Xh.
3B00:xx5D nic.mdm Receive frame failed. No interrupt.
3B00:xx5E nic.mdm Receive frame failed. Completion failed (no interrupt).
3B00:xx5F nic.mdm Receive frame failed. Completion failed (retcode=%Xh).
3B00:xx60 nic.mdm Receive frame failed. Error=%d.
3B00:xx61 nic.mdm Receive frame failed. No interrupt.
3B00:xx62 nic.mdm Receive frame failed. Length is wrong (rcv_length=%d tx_length=%d).
3B00:xx63 nic.mdm Receive frame failed. Invalid data (rcv=%Xh tx=%Xh index=%d).
3B00:xx64 nic.mdm Adapter ‘Close’ failed. No interrupt, error=%d.
3B00:xx65 nic.mdm Adapter ‘Close’ failed. Retcode=%Xh.
3B00:xx66 nic.mdm Initialization failure. Reset failed (no interrupt, error=%d).
3B00:xx67 nic.mdm Initialization failure. Reset failed (bad SRB address).
3B00:xx68 nic.mdm Initialization failure. Invalid initialization command (cmd=%Xh).
3B00:xx69 nic.mdm On-board diagnostic failed (bring_up_code=%Xh).
3B00:xx6A nic.mdm Network Inteface Controller : Self Test Failure
3B00:xx6B nic.mdm Invalid Checksum. Expected %04X. Read %04X.
3B00:xx6C nic.mdm Timeout Waiting for SCB
3B00:xx6D nic.mdm Command %X Failed to execute
3B00:xx6E nic.mdm Unable to Stop Receive Unit, Status=%X
3B00:xx6F nic.mdm Full Duplex not implemented
3B00:xx70 nic.mdm Command Timeout for Send Packet
3B00:xx71 nic.mdm Command Timeout for Wait Packet
3B00:xx72 nic.mdm Data Signature did not match
3B00:xx73 nic.mdm Packet Number did not match
3B00:xx74 nic.mdm Fail : Network Interface Internal Loopback Test. Result code %04Xh. Attempting %s
3B00:xx81 nic.mdm EEPROM timeout failure. Adapter error code : %d.
3B00:xx81 nic.mdm EEPROM timeout failure. Reading EEPROM during Checksum Test. Adapter error code : %d.
3B00:xx81 nic.mdm EEPROM timeout failure. Reading manufacture information during Checksum Test. Adapter error code : %d.
3B00:xx81 nic.mdm EEPROM timeout failure. Write to EEPROM during EEPROM Read/Write Test. Adapter error code : %d.
3B00:xx82 nic.mdm Indirect Register Test Failed. Expected %08Xh but read %08Xh.
3B00:xx83 nic.mdm Read only bit changed after writing 0’s to the test bits at offset %04Xh. Read %08Xh.
3B00:xx84 nic.mdm Read/Write bit did not clear after writing 0’s to the test bits at offset %04Xh. Read %08Xh.
3B00:xx85 nic.mdm Read only bit changed after writing 1’s to test bits at offset %04Xh. Read %08Xh.
3B00:xx86 nic.mdm Read/Write bit did not get set after writing 1’s to test bits at offset %04Xh. Read %08Xh.
3B00:xx87 nic.mdm Invalid interrupt count. Expected %Xh but received %Xh.
3B00:xx88 nic.mdm EEPROM failure detected. Expected a Boot Strap checksum of %04Xh but read %04Xh.
3B00:xx89 nic.mdm EEPROM failure detected. Expected a Manufacturing information checksum of %04Xh but read %04Xh.
3B00:xx8A nic.mdm EEPROM failure detected. Expected a value of %08Xh but read %08Xh.
3B00:xx8B nic.mdm Built in Self Test failure detected.
3B00:xx8C nic.mdm DMA read failure detected.
3B00:xx8D nic.mdm DMA write failure detected.
3B00:xx8E nic.mdm DMA failure detected. Expected a value of %08Xh but found %08Xh.
3B00:xx8F nic.mdm Reset adapter failed. Timeout waiting for offset %04Xh.
3B00:xx90 nic.mdm Internal Loopback failure detected. Too many fragments for one packet.
3B00:xx91 nic.mdm Internal Loopback failure detected. Fail to send packets out.
3B00:xx92 nic.mdm Expected to Transmit %d packet(s) but only %d were transmitted.
3B00:xx93 nic.mdm Expected to Receive %d packet(s) but only %d were received.
3B00:xx94 nic.mdm Memory malloc failed for %s.
3B00:xx95 nic.mdm FATAL. Null packet descriptor pointer
3B00:xx96 nic.mdm Link is down
3B00:xx97 nic.mdm Timeout reset to register addr %ph, read %08lxh, bit %08xh did not clear
3B00:xxAB nic.mdm Self Test Failure
3B00:xxAC nic.mdm Invalid Checksum. Expected %04X. Read %04X.
3B00:xxAD nic.mdm Timeout Waiting for SCB
3B00:xxAE nic.mdm Command %X Failed to execute
3B00:xxAF nic.mdm Unable to Stop Receive Unit, Status=%X
3B00:xxB0 nic.mdm Full Duplex not implemented
3B00:xxB1 nic.mdm Command Timeout for Send Packet
3B00:xxB2 nic.mdm Command Timeout for Wait Packet
3B00:xxB3 nic.mdm Data Signature did not match
3B00:xxB4 nic.mdm Packet Number did not match
3C00:xx02 nic8254x.mdm Initialization failure. Unable to allocate memory for %s.
3C00:xx19 nic8254x.mdm Invalid Checksum. Expected %04Xh. Read %04Xh.
3C00:xx1A nic8254x.mdm Pattern test failed @%08lX Expected %lXh, Actual %lXh.
3C00:xx1B nic8254x.mdm Invalid interrupt count. Step %d Mask %lXh Cause %lXh. Expected %Xh, found %Xh.
3C00:xx1C nic8254x.mdm Transmit head pointer is invalid.
3C00:xx1D nic8254x.mdm Transmit header overflow.
3C00:xx1E nic8254x.mdm Transmit payload overflow.
3C00:xx1F nic8254x.mdm Received packet %d was corrupted.
3C00:xx20 nic8254x.mdm No received packets.
3C00:xx21 nic8254x.mdm No response.
3C00:xx22 nic8254x.mdm Unknown Failure.
3C00:xx23 nic8254x.mdm Unable to read EEPROM contents. Reason: %s
3D00:xx02 parallel.mdm Memory allocation error. Unable to create %s.
3D00:xx19 parallel.mdm One or more of the parallel port registers failed the internal test. %s
3D00:xx1A parallel.mdm Failed the control register to status register loopback test. %s
3D00:xx1B parallel.mdm Failed the data loopback test. %s
3D00:xx1C parallel.mdm Errors indicate that a loopback plug may be installed on this port! %s
3D00:xx1D parallel.mdm Errors may be because there is no loopback plug installed on this port! %s
3D00:xx1E parallel.mdm Errors indicate that an incorrect loopback plug may be installed on this port. %s
3D00:xx1F parallel.mdm Incorrect interrupt count. IRQ %d. Expected %d interrupts but received %d.
3D00:xx20 parallel.mdm No interrupts were generated. This may be a problem with the parallel port, or the interrupt circuitry on the system, or the system’s interrupt configuration.
3D00:xx21 parallel.mdm Timeout error waiting for printer. Status Error (%Xh).
3D00:xx22 parallel.mdm All data bits failed on a bidirectional test. %s
3F00:xx02 pci.mdm Initialization Failure. Unable to allocate memory for %s.
4000:xx02 perc2ada.mdm Constructor failure. Insufficient memory to create device objects at line %d.
4000:xx02 perc2ada.mdm Initialization code failed. Memory allocation failure at line %d.
4100:xx02 pnp.mdm Initialization failure. Memory below 1 MB is not available.
4100:xx02 pnp.mdm Initialization failure. Unable to allocate memory for %s.
4300:xx02 raid.mdm Memory allocation failure creating %s.
4300:xx19 raid.mdm BIOS Checksum mismatch. Expected %04Xh, but found %04Xh at line %d.
4300:xx1A raid.mdm Non-ECC DRAM or XOR disabled.
4300:xx1B raid.mdm Unknown DRAM error.
4300:xx1C raid.mdm Timeout waiting for controller at line %d.
4300:xx1D raid.mdm Timeout waiting for controller. Unable to write DRAM address %Xh from host address %Xh (%d bytes).
4300:xx1E raid.mdm Timeout waiting for controller. Unable to read DRAM address %Xh to host address %X (%d bytes).
4300:xx1F raid.mdm Incomplete status from controller.
4300:xx20 raid.mdm Unable to load sequencer at line %d.
4300:xx21 raid.mdm Sequencer reported a self-test failure at line %d.
4300:xx22 raid.mdm Bus Master unable to transfer data at line %d.
4300:xx23 raid.mdm Memory size mismatch. Found %d MB, but user specified the size to be %d.
4300:xx24 raid.mdm Error sizing ROM. Expected size of %d MB but found %d MB at line %d.
4300:xx25 raid.mdm Internal error, DRAM size is 0.
4300:xx26 raid.mdm Memory miscompare. Failure at offset %Xh. Expected %02Xh but found %02Xh at line %d.
4400:xx00 scsi.mdm Beginning block percentage (%d%%)(%d) is past specified ending block (%d).
4400:xx00 scsi.mdm Ending block number (%d) must be greater than beginning block number (%d).
4400:xx00 scsi.mdm Ending block percentage (%d%%)(%d) is before specified beginning block (%d).
4400:xx00 scsi.mdm Ending block percentage (%d) must be greater than beginning block percentage (%d).
4400:xx00 scsi.mdm Specified combination of block ranges/percentages is an invalid configuration.
4400:xx00 scsi.mdm Specifying both Enable write cache after test and Disable write cache after test is inconsistent behavior.
4400:xx00 scsi.mdm Specifying report soft errors but implement error correction is inconsistent.
4400:xx00 scsi.mdm Specifying startdst and completedst on the same command line is inconsistent.
4400:xx02 scsi.mdm %s called with status 0, block %lu
4400:xx02 scsi.mdm Cannot add parameter %s. The parameter type %d is not supported in the cScsiDevice constructor.
4400:xx02 scsi.mdm Error allocating memory for test: Requested %d bytes Line (%d)
4400:xx02 scsi.mdm Fatal error calling controller support module.
4400:xx02 scsi.mdm fGetParam not able to find the parameter ‘%s’.
4400:xx02 scsi.mdm Insufficient memory to allocate a cMchModule object.
4400:xx02 scsi.mdm Insufficient memory to allocate a sDDS3Info object.
4400:xx02 scsi.mdm Invalid command received: Command %x, target id %d, LUN %d, manufacturer %s, product %s
4400:xx02 scsi.mdm Stack error creating the device name(%d) or mnemonic(%d)
4400:xx02 scsi.mdm Unable to allocate memory for the device class.
4400:xx19 scsi.mdm Recovered error
4400:xx1A scsi.mdm Target not ready
4400:xx1B scsi.mdm Medium error
4400:xx1C scsi.mdm Target hardware error
4400:xx1D scsi.mdm Invalid request
4400:xx1E scsi.mdm Unit attention
4400:xx1F scsi.mdm Target was read- or write-protected
4400:xx20 scsi.mdm Blank check
4400:xx21 scsi.mdm Vendor-specific error
4400:xx22 scsi.mdm Copy aborted
4400:xx23 scsi.mdm Aborted command
4400:xx24 scsi.mdm Equal
4400:xx25 scsi.mdm Volume overflow
4400:xx26 scsi.mdm Miscompare
4400:xx27 scsi.mdm Reserved for future use
4400:xx28 scsi.mdm Interface parity error
4400:xx29 scsi.mdm Unknown target error
4400:xx2A scsi.mdm Unknown error
4400:xx2B scsi.mdm No supported controllers were located
4400:xx2C scsi.mdm No targets installed
4400:xx2D scsi.mdm Invalid adapter number specified
4400:xx2E scsi.mdm Invalid target number specified
4400:xx2F scsi.mdm Invalid block number specified
4400:xx30 scsi.mdm Error allocating memory
4400:xx31 scsi.mdm Target not responding
4400:xx32 scsi.mdm Unknown host error
4400:xx33 scsi.mdm Error data not corrected by ECC algorithm
4400:xx34 scsi.mdm Timeout waiting for adapter idle
4400:xx35 scsi.mdm Timeout waiting for adapter reset completion
4400:xx36 scsi.mdm Timeout waiting for data out port empty
4400:xx37 scsi.mdm Timeout waiting for data in port full
4400:xx38 scsi.mdm Adapter board self-test failed
4400:xx39 scsi.mdm Host adapter command error
4400:xx3A scsi.mdm Command timeout
4400:xx3B scsi.mdm Target logical unit is busy
4400:xx3C scsi.mdm Command control block aborted by host
4400:xx3D scsi.mdm Data compare error
4400:xx3E scsi.mdm Unknown DMA channel
4400:xx3F scsi.mdm Unknown interrupt channel
4400:xx40 scsi.mdm Timeout waiting for CSIRINT bit to clear
4400:xx41 scsi.mdm Timeout waiting for CSIRCMP bit
4400:xx42 scsi.mdm Pointer returned in mailbox is incorrect
4400:xx43 scsi.mdm Timeout waiting for Semaphore
4400:xx44 scsi.mdm Target does not have removable media
4400:xx45 scsi.mdm Selection time out
4400:xx46 scsi.mdm Data overrun or underrun
4400:xx47 scsi.mdm Unexpected bus free
4400:xx48 scsi.mdm Invalid phase change
4400:xx49 scsi.mdm Invalid command
4400:xx4A scsi.mdm Invalid target direction received from host
4400:xx4B scsi.mdm Duplicate CCB received in target mode
4400:xx4C scsi.mdm Invalid parameters
4400:xx4D scsi.mdm Invalid data list
4400:xx4E scsi.mdm CPU diagnostic error
4400:xx4F scsi.mdm Buffer RAM diagnostic error
4400:xx50 scsi.mdm Static RAM diagnostic fail
4400:xx51 scsi.mdm Adapter cache tag RAM diag fail
4400:xx52 scsi.mdm BMIC Chip Diagnostic Error
4400:xx53 scsi.mdm ROM Checksum Error
4400:xx54 scsi.mdm Invalid Data in Config Reg
4400:xx55 scsi.mdm Buffer Parity Error
4400:xx56 scsi.mdm EISA Bus Transfer Parity Error
4400:xx57 scsi.mdm EISA Interface Transfer Error
4400:xx58 scsi.mdm Unable to abort
4400:xx59 scsi.mdm Request sense failed
4400:xx5A scsi.mdm Unexpected command complete message
4400:xx5B scsi.mdm Initial controller power-up
4400:xx5C scsi.mdm Message reject received
4400:xx5D scsi.mdm Invalid logical unit number
4400:xx5E scsi.mdm Bus busy
4400:xx5F scsi.mdm Bus reset
4400:xx60 scsi.mdm CCB length inadequate
4400:xx61 scsi.mdm Invalid initiator ID
4400:xx62 scsi.mdm Host adapter RAM parity error
4400:xx63 scsi.mdm Firmware not downloaded
4400:xx64 scsi.mdm Acknowledge timeout
4400:xx65 scsi.mdm IRQ Error
4400:xx66 scsi.mdm Timeout waiting for sequencer to pause
4400:xx67 scsi.mdm Timeout waiting for REQ
4400:xx68 scsi.mdm Timeout waiting for BSY
4400:xx69 scsi.mdm Timeout waiting for DMA to complete
4400:xx6A scsi.mdm Invalid IRQ received
4400:xx6B scsi.mdm Cannot perform test, no audio tracks to play
4400:xx6C scsi.mdm No audio output
4400:xx6D scsi.mdm Command not completed by target
4400:xx6E scsi.mdm Bad status returned by target
4400:xx6F scsi.mdm Incompatible CD for testing
4400:xx70 scsi.mdm Unable to retrieve diags page %d. Line (%d)
4400:xx71 scsi.mdm Unable to obtain temperature
4400:xx72 scsi.mdm The fans are reported not at full speed
4400:xx73 scsi.mdm Under temperature sensor failure
4400:xx74 scsi.mdm Over temperature sensor failure
4400:xx75 scsi.mdm User indicated that the test failed. Line (%d)
4400:xx76 scsi.mdm Test is not applicable to the selected device
4400:xx77 scsi.mdm Fatal autoloader error. Check tape magazine and restart diagnostics
4400:xx78 scsi.mdm Medium size was reported as 0
4400:xx79 scsi.mdm Data compare error. Line (%d): Block %u, Offset %lu – Data was %02.2Xh, Should be %02.2Xh
4400:xx7A scsi.mdm Tape Unit did not become ready
4400:xx7B scsi.mdm Unable to allocate %d bytes of memory. Line (%d)
4400:xx7C scsi.mdm Number of %s defect list entries (%d) exceeded limit specified (%d)
4400:xx7D scsi.mdm Cannot run test without seven or eight tapes in the cartridge.
4400:xx7E scsi.mdm Drive Self Test failed with error value (0x%02.2X)(%s)
4400:xx7F scsi.mdm Read/Write Buffer Test data mismatch.
4400:xx80 scsi.mdm SMART Failure prediction threshold exceeded
4400:xx81 scsi.mdm Command queue full
4400:xx82 scsi.mdm An unrecognized or unsupported message was received.
4400:xx83 scsi.mdm The requested transfer size was too large.
4400:xx84 scsi.mdm The self-test took too long to run
4400:xx85 scsi.mdm %s Mode page %02X[%02X] read %02lX, expected %02lX, mask %02lX
4400:xx86 scsi.mdm Drive total logical blocks %ld is in between defined sizes %ld \”%s\” and %ld \”%s\”
4400:xx87 scsi.mdm Drive speed %s is slower than Ctlr speed %s
4400:xx88 scsi.mdm Expected Transfer Period %02X (%s), actual period %02X (%s)
4400:xx89 scsi.mdm Expected Transfer Width %02X (%s), actual width %02X (%s)
4400:xx8A scsi.mdm TapeAlert: Tape needs cleaning now
4400:xx8B scsi.mdm TapeAlert: Tape drive is due for routine cleaning
4400:xx8C scsi.mdm Invalid bus number specified
4400:xx8D scsi.mdm The drive was not found in the firmware database specified
4400:xx8E scsi.mdm Incorrect firmware version
4400:xx8F scsi.mdm Could not find the firmware update file
4400:xx90 scsi.mdm Error changing directories
4400:xx91 scsi.mdm Error retrieving the path to the firmware file
4400:xx92 scsi.mdm No files or subdirectories found in the firmware root directory
4400:xx93 scsi.mdm Error saving the default directory
4400:xx94 scsi.mdm Error restoring the default directory
4400:xx95 scsi.mdm Invalid firmware file root directory
4400:xx96 scsi.mdm Error reading the firmware database file
4400:xx97 scsi.mdm Error opening the firmware database file
4400:xx98 scsi.mdm Error reading the firmware update file
4400:xx99 scsi.mdm Error retrieving the size of the firmware file
4400:xx9A scsi.mdm Error opening the firmware update file
4400:xx9B scsi.mdm Logical drive is not configured or is ‘FAILED’
4400:xx9C scsi.mdm Tape speed %s is not equal to expected speed %s
4400:xx9D scsi.mdm Firmware update failed because Tape media was present
4400:xx9E scsi.mdm Tape unload failed
4400:xx9F scsi.mdm Physical drive is not ‘OPTIMAL’, test not possible at this time
4400:xxA0 scsi.mdm Firmware file is not ‘LIF’ format
4400:xxA1 scsi.mdm Firmware file is the wrong ‘LIF’ format
4400:xxA2 scsi.mdm Reservation conflict
4400:xxA3 scsi.mdm Device I/O error
4400:xxA4 scsi.mdm Read error
4400:xxA5 scsi.mdm No path available to the device
4400:xxA6 scsi.mdm No cable is connected
4400:xxA7 scsi.mdm Logical drive Check Consistency(CC) is in progress
4400:xxA8 scsi.mdm Logical drive initialization is in progress
4400:xxA9 scsi.mdm Logical drive rebuild is in progress
4400:xxAA scsi.mdm Logical drive reconstruction is in progress
4400:xxAB scsi.mdm Controller hardware error
4400:xxAC scsi.mdm Physical drive CLEAR in progress
4400:xxAD scsi.mdm Unable to use SATA(SAS) drive to replace SAS(SATA)
4400:xxAE scsi.mdm Command issues while firmware is in wrong state
4400:xxAF scsi.mdm Logical drive is offline – I/O not possible
4400:xxB0 scsi.mdm Logical drive reservation is already in progress
4400:xxB1 scsi.mdm Controller diagnostics failed
4400:xxB2 scsi.mdm Receive Diagnostics Results Page error
4400:xxB3 scsi.mdm Incorrect STRING-IN Page Code received
4400:xxB4 scsi.mdm Firmware image header bytes do not match header length
4400:xxB5 scsi.mdm Firmware image validation error
4400:xxB6 scsi.mdm Firmware Download Unsuccessful. FW versions mismatch.
4400:xxB7 scsi.mdm Send Diagnostics STRING-OUT Page Error. String Out Command Code [%d]
4400:xxB8 scsi.mdm Processor(Backplane-FlexBay) Firmware Download error
4400:xxB9 scsi.mdm Older Binary Image Version. Image version [%s] Processor(BP/FB) Version [%s]
4400:xxBA scsi.mdm Binary Image Version Same. Image version [%s] Processor(BP/FB) Version [%s]
4400:xxBB scsi.mdm Writing to backplane error. Chunk# %d
4400:xxBC scsi.mdm SAS SMP request failed
4400:xxBD scsi.mdm SAS SMP data overrun
4400:xxBE scsi.mdm USB bus error or timeout.
4400:xxBF scsi.mdm USB device was removed. You must restart the diagnostics to re-detect this device.
4400:xxC0 scsi.mdm Recovery Time Limit can not be changed for mode page %d
4400:xxC1 scsi.mdm Recovery Time Limit mismatch for mode page %d, read %d expected %d
4400:xxC2 scsi.mdm TapeAlert: The tape drive has a hardware fault
4400:xxC3 scsi.mdm TapeAlert: The tape drive has a problem with the host interface (cables)
4400:xxC4 scsi.mdm Controller is not in an operational state.
4400:xxC5 scsi.mdm Controller is offline (caused by a command timeout).
4500:xx02 serial.mdm Failure during device detection. Infrared controller found, but without port service
4500:xx02 serial.mdm Failure during device detection. Infrared service from system module not accessible at line %d
4500:xx02 serial.mdm Failure during device detection. Memory allocation error at line %d.
4500:xx02 serial.mdm Failure during device detection. Unknown infrared controller %d
4500:xx02 serial.mdm Invalid hardware configuration. Port %Xh has IRQ assigned as %Xh.
4500:xx02 serial.mdm Memory allocation error during class constructor. %s
4500:xx02 serial.mdm Memory allocation error. Module class can not be instantiated.
4500:xx02 serial.mdm Memory allocation error. Serial class can not be instantiated for port %d.
4500:xx02 serial.mdm Memory allocation error. Unable to create the a serial service port object.
4500:xx02 serial.mdm Port is operating outside of allowable speed tolerances. Port base address %Xh experienced %d interrupts against a limit of %d interrupts.
4500:xx19 serial.mdm Port is operating outside of allowable speed tolerances. Port base address %Xh is transmitting at %d cps, against an expected %d cps.
4500:xx1A serial.mdm Real time clock is not functioning. System BIOS reports repeated failure to read the clock. The serial tests make use of the system real time clock for determining elapsed time, and can not be used if the real time clock is not functional.
4500:xx1B serial.mdm Real time clock is not functioning. System BIOS can no longer read the clock. The serial tests make use of the system real time clock for determining elapsed time, and can not be used if the real time clock is not functional.
4500:xx1C serial.mdm Incorrect number of interrupts received. Port base address %Xh, irq %d, received %d interrupts but was expecting 1.
4500:xx1D serial.mdm Failure on Modem Control Register loopback. Port base address %Xh expected character %02x but received %02x.
4500:xx1E serial.mdm Failure on internal loopback. Port base address %Xh.
4500:xx1F serial.mdm Failure on Line Status Register loopback. Port base address %Xh, transmit buffer not empty.
4500:xx20 serial.mdm Failure on Line Status Register loopback. Port base address %Xh, expected data not received.
4500:xx21 serial.mdm Failure on Line Status Register loopback. Port base address %Xh, overrun error not detected.
4500:xx22 serial.mdm Failure on Line Status Register loopback. Port base address %Xh, transmit buffer not empty on retransmission.
4500:xx23 serial.mdm Failure when using external loopback connector. Modem control register continues to show activity.
4500:xx24 serial.mdm Failure when using external loopback connector. Clear to send not seen in modem control. Possible missing loopback connector.
4500:xx25 serial.mdm Failure when using external loopback connector. Clear to send not seen in modem control.
4500:xx26 serial.mdm Failure when using external loopback connector. Carrier detect and data set ready not seen in modem control register.
4500:xx27 serial.mdm Failure when using external loopback connector. Data set ready and data carrier bits did not clear in modem control register.
4500:xx28 serial.mdm Failure when using external loopback connector. Line control register test failure.
4500:xx29 serial.mdm Failure when using external loopback connector. Receive data not ready, baud select %d, expected %02x.
4500:xx2A serial.mdm Failure when using external loopback connector. Data mismatch on transmission, found %02lx, expected %02x.
4500:xx2B serial.mdm Failure when using external loopback connector. Buffer full interrupt not received.
4500:xx2C serial.mdm Failure when using external loopback connector. Line status interrupt not received.
4500:xx2D serial.mdm Failure when using external loopback connector. Line status interrupt for second character not received.
4500:xx2E serial.mdm Failure when using external loopback connector. Modem status interrupt not received.
4600:xx02 smbios.mdm Can not locate service %s (%d)
4600:xx02 smbios.mdm Initialization failure. Unable to allocate a selector to the tables.
4600:xx02 smbios.mdm Initialization failure. Unable to allocate memory for %s.
4600:xx19 smbios.mdm Structure count error. Found %d, expected %d structures.
4600:xx1A smbios.mdm Unable to access device state. SMI handler returned error (%xh) while trying to retrieve the device state.
4600:xx1B smbios.mdm Parameter requested instance %d of type %d structure does not exist.
4600:xx1C smbios.mdm Device State Out of Acceptable Range.
4600:xx1E smbios.mdm %s %d – %s.
4600:xx1E smbios.mdm %s %s – %s.
4600:xx1F smbios.mdm SmBios structure %d has illegal 0-length.
4600:xx20 smbios.mdm SmBios calling interface function failed.
4600:xx21 smbios.mdm Wireless switch not in the ‘%s’ position.
4600:xx22 smbios.mdm System powered up via Media Direct button.
4700:xx02 smbus.mdm The SMBus service failed during initialization. Unable to allocate memory for %s.
4800:xx02 smi.mdm Failed to allocate memory for %s NMI services.
4800:xx02 smi.mdm Failed to allocate memory for %s SMI services.
4800:xx02 smi.mdm Illegal attempt to disable %s SMI without restoring original values first.
4800:xx02 smi.mdm Illegal attempt to restore %s SMI without first saving the initial state.
4800:xx02 smi.mdm Unable to locate required %s controller.
4B00:xx02 sysbdmon.mdm Failed to add the %s test
4B00:xx02 sysbdmon.mdm Failed to create the %s module
4B00:xx02 sysbdmon.mdm Failed to create the %s object
4B00:xx17 sysbdmon.mdm %s: Failed to send SMBus command.
4B00:xx17 sysbdmon.mdm Unable to read ADM1026 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to read ADM1027 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to read ADT7460 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to read EMC6W201 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to write ADM1026 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to write ADM1027 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to write ADT7460 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to write EMC6W201 (0x%02X) register (0x%02X) using SMBus
4B00:xx18 sysbdmon.mdm %s input is out of range. Current = %.3f Max = %.3f Min = %.3f.
4B00:xx1F sysbdmon.mdm Intrusion Detection Bit is set, Expected no intrusion.
4B00:xx20 sysbdmon.mdm %s temperature is out of range. Current = %d Celsius Max = %d Celsius Min = %d Celsius.
4B00:xx20 sysbdmon.mdm Temperature is out of range. Current = %.3f. Max = %.3f. Min = %.3f.
4B00:xx21 sysbdmon.mdm %s speed is out of range. Current = %.3f. Min = %.3f.
4B00:xx21 sysbdmon.mdm %s speed is out of range. Current = %u RPM Max = %u RPM Min = %u RPM.
4B00:xx22 sysbdmon.mdm Failed to send MAX1617 Start-Conversion command.
4B00:xx23 sysbdmon.mdm Time-out waiting for the conversion to finish.
4B00:xx24 sysbdmon.mdm Power Supply %s is installed but its status is NOT OK.
4B00:xx25 sysbdmon.mdm The number of power supplies specified, %d, is not the same as the number found, %d.
4B00:xx26 sysbdmon.mdm Temperature is out of range. Current = %.1f. OverTemperature Shutdown = %.1f.
4B00:xx28 sysbdmon.mdm Unable to reserve the local I2C bus for use.
4B00:xx29 sysbdmon.mdm Temperature signal indicates an open or short condition. Signal is %s
4B00:xx2A sysbdmon.mdm %s fan is not connected or not spinning.
4B00:xx2B sysbdmon.mdm Hardware monitor indicates current or recent %s failure.
4C00:xx19 system.mdm Speaker could not be heard. The operator replied ‘No’ to the prompt indicating that the tones were not heard from the speaker.
4C00:xx1A system.mdm The interrupt routine is not being called. Channel 0 (mode 0) is not generating interrupts. It might not be counting properly or the interrupt mechanism is not working.
4C00:xx1B system.mdm Interrupt IRQ0 is at the wrong frequency. Channel 0 (mode 3) is generating the wrong interrupt count per second. Expected :%d, Actual: %d.
4C00:xx1C system.mdm Channel 2 is not operating correctly. %s
4C00:xx1D system.mdm The ‘Seconds’ register is not updating. The register is not updating or is updating too slowly. The part may be bad or the 32-KHz crystal might not be functioning.
4C00:xx1E system.mdm The time registers did not increment correctly. The RTC did not generate the expected time after it was set for the maximum value and allowed to roll-over.
4C00:xx1F system.mdm The CMOS battery failed. Status Register D of the RTC chip indicates that the CMOS is not valid because the backup battery is not working.
4C00:xx20 system.mdm CMOS failed the pattern test. Location: %02Xh, Expected: %02Xh, Actual: %02Xh.
4C00:xx21 system.mdm Incorrect data testing the DMA %s. Port: %02Xh Expected: %02Xh Actual: %02Xh.
4C00:xx22 system.mdm The interrupt controller, or a device attached to it, is not working. No interrupt detected for IRQ %d – %s.
4C00:xx23 system.mdm A PC card is not seated properly. Check the card in socket %c (index %Xh, base %Xh).
4C00:xx24 system.mdm Unable to access any PCIC register.
4C00:xx25 system.mdm One or more PCIC registers failed.
4C00:xx26 system.mdm Failed to load and store constant 0.0.
4C00:xx26 system.mdm Failed to load and store constant 1.0.
4C00:xx26 system.mdm Failed to load and store constant ln 2.
4C00:xx26 system.mdm Failed to load and store constant log 2.
4C00:xx26 system.mdm Failed to load and store constant log2 of 10.
4C00:xx26 system.mdm Failed to load and store constant log2 of ‘e’.
4C00:xx26 system.mdm Failed to load and store constant ‘pi’.
4C00:xx27 system.mdm Failed to load and store integer 1.
4C00:xx27 system.mdm Failed to load integer 1 and store as BCD.
4C00:xx27 system.mdm Failed to load integer 1 and store as long real 1.0.
4C00:xx27 system.mdm Failed to load integer 1 and store as short real 1.0.
4C00:xx27 system.mdm Failed to load integer 32767 and store as short real 32767.0.
4C00:xx27 system.mdm Failed to load integer -32768 and store as short real -32768.0.
4C00:xx27 system.mdm Failed to load long real 0.0 and store as integer 0.
4C00:xx27 system.mdm Failed to load long real 1.0 and store as integer 1.
4C00:xx27 system.mdm Failed to load long real -1.0 and store as integer -1.
4C00:xx27 system.mdm Failed to load short real 0.0 and store as integer 0.
4C00:xx27 system.mdm Failed to load short real 1.0 and store as integer 1.
4C00:xx27 system.mdm Failed to load short real -1.0 and store as integer -1.
4C00:xx28 system.mdm Wrong status after 1.0 / 0.0.
4C00:xx28 system.mdm Wrong status after comparing 1.0 and 1.0.
4C00:xx28 system.mdm Wrong status after comparing 2.0 and 3.0.
4C00:xx28 system.mdm Wrong status after comparing 3.0 and 2.0.
4C00:xx29 system.mdm Wrong stack tags after ‘fadd’ instruction.
4C00:xx29 system.mdm Wrong stack tags after ‘faddp’ instruction.
4C00:xx2A system.mdm Wrong status after 2.0 – 3.0.
4C00:xx2A system.mdm Wrong status after 3.0 – 2.0.
4C00:xx2A system.mdm Wrong status after 3.0 * 2.0.
4C00:xx2A system.mdm Wrong status after 3.0 / 2.0.
4C00:xx2A system.mdm Wrong status after 3.0 + 2.0.
4C00:xx2B system.mdm Calculation error of 3.0 / 2.0.
4C00:xx2B system.mdm Calculation error of arctangent (tangent (pi/4.0)) * 4.0.
4C00:xx2B system.mdm Calculation error of log2(((2 ** (pi/8)) -1) + 1) * 8.
4C00:xx2B system.mdm Calculation error of the square root of 2.0.
4C00:xx2C system.mdm Wrong status after generating a denormalized operand.
4C00:xx2C system.mdm Wrong status after generating a precision failure.
4C00:xx2C system.mdm Wrong status after generating an overflow.
4C00:xx2C system.mdm Wrong status after generating an underflow.
4C00:xx2C system.mdm Wrong status after performing a divide by zero.
4C00:xx2C system.mdm Wrong status after purposely performing an invalid operation.
4C00:xx2D system.mdm No IRQ13 following a denormalized operand.
4C00:xx2D system.mdm No IRQ13 following a precision exception.
4C00:xx2D system.mdm No IRQ13 following a zero divide.
4C00:xx2D system.mdm No IRQ13 following an invalid result.
4C00:xx2D system.mdm No IRQ13 following an overflow.
4C00:xx2D system.mdm No IRQ13 following an underflow.
4C00:xx2E system.mdm ACPI Timer is not found in the system.
4C00:xx2E system.mdm Unable to access any PCIC register. First error:\n Socket: %c (index %Xh, base %Xh)\n Register index: %Xh\n Test pattern: %Xh\n Data read: %Xh\n Bits tested: %Xh\n
4C00:xx2F system.mdm ACPI Timer is dead, not updating.
4C00:xx2F system.mdm One or more PCIC registers failed. First error:\n Socket: %c (index %Xh, base %Xh)\n Register index: %Xh\n Test pattern: %Xh\n Data read: %Xh\n Bits tested: %Xh\n
4C00:xx30 system.mdm ACPI Timer is not running correctly, otherwise system timer 2 is broken.
4C00:xx31 system.mdm RTC verification by ACPI timer failed.
4C00:xx32 system.mdm ACPI timer verification by RTC failed.
4E00:xx02 usb.mdm File %s line %d. Out of memory.
4E00:xx02 usb.mdm Unable to locate service %s.
4E00:xx19 usb.mdm Unable to get register #%u mask.
4E00:xx1A usb.mdm Unable to read register #%u.
4E00:xx1B usb.mdm Unable to write register #%u.
4E00:xx1C usb.mdm Register #%u read or write failed (8-bit). Found:%02Xh Expected:%02Xh.
4E00:xx1D usb.mdm Register #%u read or write failed (16-bit). Found:%04Xh Expected:%04Xh.
4E00:xx1E usb.mdm Register #%u read or write failed (32-bit). Found:%08Xh Expected:%08Xh.
4E00:xx1F usb.mdm Unable to disable UHCI interrupts.
4E00:xx20 usb.mdm Unable to reset UHCI controller.
4E00:xx21 usb.mdm Unable to process End Point Descriptor.
4E00:xx22 usb.mdm Unable to allocate enough memory for UHCI control structures.
4E00:xx23 usb.mdm Incorrect Memory Structure Test #%u requested.
4E00:xx24 usb.mdm FRNUM Register is not walking frame list.
4E00:xx25 usb.mdm FmRemaining register is not decrementing.
4E00:xx26 usb.mdm FRNUM register indicates controller stopped polling at wrong index. Checking bad maximum length in a TD.
4E00:xx26 usb.mdm FRNUM register indicates controller stopped polling at wrong index. Checking bad Packet ID in a TD.
4E00:xx26 usb.mdm FRNUM register indicates controller stopped polling at wrong index. Checking Que Headers.
4E00:xx26 usb.mdm FRNUM register indicates controller stopped polling at wrong index. Checking that Frame List Counter Wraps.
4E00:xx26 usb.mdm FRNUM register indicates controller stopped polling at wrong index. Verifying that Frame List Counter Wraps.
4E00:xx27 usb.mdm Expected the run/stop bit in USBCMD register to clear. Controller did not properly detect faulty transaction (bad TD PID) data.
4E00:xx28 usb.mdm USB controller did not generate the error interrupt that was expected.
4E00:xx29 usb.mdm Unable to clear USBSTS register bit.
4E00:xx2A usb.mdm USB controller did not set the correct bits in USBSTS when given a bad TD PID.
4E00:xx2B usb.mdm USB controller %d shows an over-current indication on %s
5300:xx02 video.mdm %s (line %d). Insufficient memory to create %s.
5300:xx19 video.mdm Detected a failure while writing and reading video memory. Video mode: %Xh (%dx%dx%d). Address %Xh, expected to read %Xh, but read %Xh instead.
5300:xx1A video.mdm User-specified video mode not supported.
5300:xx1B video.mdm Detected a failure while read/write testing the video Cursor Control Registers. Wrote %4.4X, but read back %4.4X.
5300:xx1C video.mdm Detected a problem with retrace status. The retrace status bits do not appear to be changing state.
5300:xx1D video.mdm The user’s response indicated a failure of text page %d (in mode 2).
5300:xx1E video.mdm The user’s response indicated a failure of a text mode pattern using video mode: %Xh (%dx%dx%d).
5300:xx1F video.mdm The user’s response indicated a failure of a graphic pattern using video mode: %Xh (%dx%dx%d).
5300:xx20 video.mdm The user’s response indicated a failure of one of the solid color patterns.
5300:xx21 video.mdm The user’s response indicated a failure.
5300:xx22 video.mdm Error occured while switching video modes.
5300:xx23 video.mdm No BIOS support for SMI interface function.
5300:xx24 video.mdm Error accessing the LCD inverter.
5300:xx25 video.mdm Unable to detect inverter lamp status.
5300:xx26 video.mdm Unable to detect %s of suspend switch.
5300:xx27 video.mdm Unable to detect %s LCD panel.
5300:xx28 video.mdm ALS test error, %s interface function failed.
5300:xx29 video.mdm ALS %s test error. Expected: %02Xh Found: %02Xh.
5300:xx2A video.mdm M07 inverter not found.
5500:xx00 lsi.mdm Controller is not in an operational state.
5500:xx00 lsi.mdm Controller is offline (caused by a command timeout).
5500:xx02 lsi.mdm Allocate of page buffer failed.
5500:xx02 lsi.mdm Found more than 100 controllers – aborting on probable BIOS error.
5500:xx02 lsi.mdm Initialization code failed. Unable to map %X into data segment.
5500:xx02 lsi.mdm Invalid parameters passed to fExecuteCommand function.
5500:xx02 lsi.mdm Memory allocation failure.
5500:xx02 lsi.mdm Unknown controller type %x.
5500:xx08 lsi.mdm Controller Firmware has not started initialization. This may indicate a hardware problem.
5500:xx08 lsi.mdm Controller Firmware hits a fault condition.
5500:xx08 lsi.mdm Controller Firmware is in a unknown (reserved) state.
5500:xx08 lsi.mdm Controller Firmware low-level initialization code is executing, Wait for it to finish.
5500:xx08 lsi.mdm Unreachable code has been executed (Default case).
5800:xx02 mpcache.mdm Only %d paragraphs of memory are available below 1 MB and the test needs %d paragraphs.
5800:xx02 mpcache.mdm Unable to allocate memory for %s.
5800:xx02 mpcache.mdm Unable to create memory mapping for I/O APIC or the local APIC.
5800:xx1A mpcache.mdm Unexpected interrupt found on CPU %2Xh. Interrupt %02Xh occurred at address %04X:%08Xh (offset %04Xh in the module).
5800:xx1C mpcache.mdm Auxiliary processor has failed. CPU (%02Xh) did not transition to protected mode.
5800:xx1D mpcache.mdm Auxiliary processor has failed. Unable to issue STARTUP message to CPU (%02Xh).
5800:xx1E mpcache.mdm Auxiliary processor has failed. Unable to issue INIT message to CPU (%02Xh).
5800:xx1F mpcache.mdm Unable to relocate the code to start the other processors to below 1 MB.
5800:xx21 mpcache.mdm Internal program error. No space left in the control tables to manage an additional CPU.
5800:xx22 mpcache.mdm Unable to stop non-boot processors. The system might be unstable and should be rebooted.
5800:xx23 mpcache.mdm Auxiliary processor has failed. Unable to send a command to CPU %02Xh.
5800:xx24 mpcache.mdm Auxiliary processor has failed. Unable to get a result from CPU %02Xh.
5800:xx26 mpcache.mdm Internal program error. Unable to locate the CPU with APIC ID %02Xh in the control tables.
5800:xx27 mpcache.mdm Internal program error. Code segment corruption was detected.
5800:xx28 mpcache.mdm Internal program error. Unknown error (%02Xh) during the test.
5800:xx2A mpcache.mdm CPU %d, Data error at address %04x. Expected %04x, but found %04x.
5800:xx2D mpcache.mdm Timeout waiting for CPU %d to reach step %d.
5800:xx2E mpcache.mdm Unknown application processor error on CPU %d.
5900:xx00 usbmouse.mdm No mouse or unknown mouse type.
5900:xx00 usbmouse.mdm The user has requested an abort of the currently executing test.
5900:xx1A usbmouse.mdm Something was wrong in URB request
5900:xx1B usbmouse.mdm No resources – try again later
5900:xx1C usbmouse.mdm Usb Request Block did not complete
5900:xx1D usbmouse.mdm Unknown USB status
5900:xx1E usbmouse.mdm Endpoint is stalled
5900:xx1F usbmouse.mdm Buffer error – under/overrun
5900:xx20 usbmouse.mdm Babble detected
5900:xx21 usbmouse.mdm Received NAK
5900:xx22 usbmouse.mdm CRC error or timeout
5900:xx23 usbmouse.mdm Bit stuffing error
5900:xx2D usbmouse.mdm Timeout error, waiting for user to complete test.
5900:xx60 usbmouse.mdm Usb Failure to get configuration Information
5900:xx61 usbmouse.mdm Usb Service Initialization Failure
5900:xx62 usbmouse.mdm Unable to allocate memory for %s.
5900:xx63 usbmouse.mdm Failed to allocate real memory.
5A00:xx00 usbkbd.mdm The user has requested an abort of the currently executing test.
5A00:xx02 usbkbd.mdm Unable to allocate memory for %s.
5A00:xx02 usbkbd.mdm Unable to create the screen image.
5A00:xx19 usbkbd.mdm The user’s response indicated a failure.
5A00:xx24 usbkbd.mdm A USB keyboard was found during initialization. The device is no longer responding. Communications cannot be
established again until the diagnostics are restarted.
5A00:xx25 usbkbd.mdm Unable to connect to endpoint %d.
5A00:xx26 usbkbd.mdm Unable to obtain data from the USB keyboard.
5A00:xx27 usbkbd.mdm Failed to send command to set LEDs properly.
5B00:xx02 usbohci.mdm Frame list is corrupt.
5B00:xx02 usbohci.mdm Initialization Failure. Unable to allocate memory for %s.
5B00:xx02 usbohci.mdm INTR/ISOCH list is corrupt.
5B00:xx02 usbohci.mdm Unable to map hcca page.
5C00:xx02 usbuhci.mdm Attempt to link QH to nothing or to a TD.
5C00:xx02 usbuhci.mdm Frame list is corrupt.
5C00:xx02 usbuhci.mdm Initialization Failure. Device is attached to a port, unable to allocate memory for %s.
5C00:xx02 usbuhci.mdm Initialization Failure. Unable to allocate memory for %s.
5C00:xx02 usbuhci.mdm INTR/ISOCH list is corrupt.
5C00:xx02 usbuhci.mdm Unable to map frame list local.
5D00:xx02 usbtm.mdm Attempt to overwrite port (%d)
5D00:xx02 usbtm.mdm Initialization Failure. Unable to allocate memory for %s.
5D00:xx02 usbtm.mdm Invalid device pointer
5D00:xx02 usbtm.mdm Invalid port number (%d)
5D00:xx02 usbtm.mdm Unable to create bandwidth array.
5D00:xx02 usbtm.mdm Unable to create cBootKbd.
5D00:xx02 usbtm.mdm Unable to create port array.
5D00:xx02 usbtm.mdm Unable to find protected memory service.
5D00:xx02 usbtm.mdm Unable to map data buffer local.
5D00:xx19 usbtm.mdm Unable to access USB device on HUB port %d. Reseat the USB connector, then reload the diagnostics.
5D00:xx1A usbtm.mdm Unable to access USB device on ROOT HUB port %d. Reseat the USB connector, then reload the diagnostics.
5E00:xx1E usbdevid.mdm Error detecting USB devices.
5E00:xx1F usbdevid.mdm A device was found during initialization. The device is no longer responding. Communications cannot be established
again until the diagnostics are restarted.
5E00:xx20 usbdevid.mdm Error detecting USB device. Device not found.
5E00:xx21 usbdevid.mdm Vendor or Device ID not specified
5E00:xx62 usbdevid.mdm Unable to allocate memory for %s.
5F00:xx02 usbufi.mdm An invalid parameter selection index of %d was specified in file %s, at line:%d.
5F00:xx02 usbufi.mdm An invalid test selection index of %d was specified in file %s, at line:%d.
5F00:xx02 usbufi.mdm Data comparison was requested for %u blocks, actual block sizes are %u and %u.
5F00:xx02 usbufi.mdm Diskette data buffer expected but not supplied in %s, at line %d.
5F00:xx02 usbufi.mdm Diskette drive test function entered without a system test context established.
5F00:xx02 usbufi.mdm Unable to allocate memory for %s.
5F00:xx1C usbufi.mdm The change line test has been failed at the user’s instruction.
5F00:xx1D usbufi.mdm The expected change line event was not detected.
5F00:xx1E usbufi.mdm The test was ended by user request.
5F00:xx1F usbufi.mdm The data written to and read back from the diskette media are not equivalent as expected. The diskette should be considered
corrupted.
5F00:xx20 usbufi.mdm The cylinder parameters are not compatible with the device’s cylinder range.
5F00:xx21 usbufi.mdm A system disk BIOS operation failed with the error code of %2.2Xh.
5F00:xx22 usbufi.mdm The system’s BIOS reported a \”Bad command\” status in response to the command code %2.2Xh
5F00:xx23 usbufi.mdm The system BIOS reported an access failure on the diskette media. Write-protection on the diskette should be disabled
and the test retried.
5F00:xx24 usbufi.mdm The BIOS could not operate on the location at %s, which may specify an invalid position for the diskette drive or media.
5F00:xx25 usbufi.mdm A status code returned by the BIOS indicates a device reset failure.
5F00:xx26 usbufi.mdm An uncorrectable Cyclic Redundancy Check (CRC) or Error Code Correction (ECC) data error occurred on the media at %s.
5F00:xx27 usbufi.mdm The BIOS reported that a correctable (soft) data error occurred on the diskette, which indicates that redundant error
code information was sufficient to correct the error.
5F00:xx28 usbufi.mdm The system’s BIOS status indicates that the diskette controller (a microprocessor which controls the diskette drive)
failed to operate correctly.
5F00:xx29 usbufi.mdm The BIOS status indicates the the seek operation (positioning the drive’s heads to location %s) failed.
5F00:xx2A usbufi.mdm The drive did not respond in a fixed time to an access attempt.
6100:xx02 adaptec2.mdm %s called but not implemented
6100:xx02 adaptec2.mdm Adaptec module hung, cannot continue.
6100:xx02 adaptec2.mdm Adapter hardware reset failed
6100:xx02 adaptec2.mdm AllocOSMIOB failed – Out of OSBIOB’s
6100:xx02 adaptec2.mdm Attempt to free memory not in the global memory table
6100:xx02 adaptec2.mdm Auto-Configuration failed
6100:xx02 adaptec2.mdm Cannot access the adapter hardware
6100:xx02 adaptec2.mdm Cannot allocate memory
6100:xx02 adaptec2.mdm Cannot locate the CPU service
6100:xx02 adaptec2.mdm Cannot locate the PCI service
6100:xx02 adaptec2.mdm Cannot locate the reserved memory service
6100:xx02 adaptec2.mdm Constructor failure – Insufficient memory to create device objects.
6100:xx02 adaptec2.mdm Could not initialize the adapter
6100:xx02 adaptec2.mdm Found more than 100 controllers – aborting on assumed BIOS error.
6100:xx02 adaptec2.mdm FreeOSMIOB passed a NULL pointer
6100:xx02 adaptec2.mdm Initialization code failed – Memory allocation failure at line %d.
6100:xx02 adaptec2.mdm IOB reserved memory greater than 4096 bytes
6100:xx02 adaptec2.mdm Out of memory entries in the global memory table
6100:xx02 adaptec2.mdm Reserved memory pointer is NULL
6100:xx02 adaptec2.mdm The adapter is requesting more than 4096 bytes of memory
6200:xx02 usbmass.mdm Initialization code failed. Unable to allocate physical memory, only %d pages available.
6300:xx64 hdaudio.mdm A timeout occurred while trying to access an AC97 register.
6300:xx65 hdaudio.mdm Read %Xh at AC97 register %Xh, expected %Xh.
6300:xx65 hdaudio.mdm The hub (SB/ICH) High Definition Audio service failed during initialization.
6300:xx66 hdaudio.mdm A timeout occurred while waiting for the audio controller to generate a record interrupt.
6300:xx66 hdaudio.mdm Unable to allocate memory for %s.
6300:xx67 hdaudio.mdm A timeout occurred while waiting for the audio controller to generate a playback interrupt.
6300:xx68 hdaudio.mdm A timeout occurred while waiting for the audio controller to generate an interrupt.
6300:xx69 hdaudio.mdm A wave file parameter is not supported by this service.
6300:xx6A hdaudio.mdm Primary codec is not ready.
6300:xx6B hdaudio.mdm Not enough buffer size
6300:xx6C hdaudio.mdm A timeout occurred while trying to access AC97 CODEC register %Xh.
6300:xx6D hdaudio.mdm The selected widget (%d ; 0x%02X) is not a PIN widget.
6300:xx6E hdaudio.mdm The PIN widget (%d ; 0x%02X) has a Jack Sense of %d. Expected %d.
6300:xx6F hdaudio.mdm The PIN widget (%d ; 0x%02X) has an impedance inbalance that is out of range. Right = %d Left = %d Max Delta = %d
6300:xx70 hdaudio.mdm The PIN widget (%d ; 0x%02X) does not support Impedance Testing. (%08Xh)
6500:xx02 usbehci.mdm BIOS did not release the USB ports.
6500:xx02 usbehci.mdm FATAL:BIOS did not disable the USB controller.
6500:xx02 usbehci.mdm Frame list is corrupt.
6500:xx02 usbehci.mdm Initialization Failure. Unable to allocate memory for %s.
6500:xx02 usbehci.mdm Timeout unlinking QH
6500:xx02 usbehci.mdm Unable to map frame list local.
6500:xx19 usbehci.mdm USB controller failed to start or stop.
6500:xx1A usbehci.mdm Register %x expected %08x observed %08x.
6500:xx1B usbehci.mdm USB controller failed to generate the %s interrupt.
6500:xx1C usbehci.mdm USB device on port %d is causing an over current condition. Unplug the device on USB port %d.
6500:xx1D usbehci.mdm USB controller failed to generate the correct number of frames. Frames = %d
6500:xx1E usbehci.mdm USB controller failed to correctly process the frame list.
6500:xx1F usbehci.mdm USB controller failed to correctly come out of reset.
6500:xxC8 usbehci.mdm Undefined test!
6600:xx02 usbbist.mdm Error allocating memory for test: Requested %d bytes Line (%d)
6600:xx02 usbbist.mdm Error retrieving the firmware file size: %s
6600:xx03 usbbist.mdm Error reading the firmware file: %s
6600:xx04 usbbist.mdm timeout: waited %d msec for device to respond with status before upload
6600:xx19 usbbist.mdm Self test failed with return code 0x%08X
6600:xx1A usbbist.mdm USB host error detected by the device.
6600:xx1B usbbist.mdm Timeout waiting for the device to respond.
6600:xx1C usbbist.mdm USB error detected.
6600:xx1D usbbist.mdm Invalid parameter passed to the device.
6600:xx1E usbbist.mdm Invalid status returned from the device.
6600:xx1F usbbist.mdm EnableBist command failed.
6600:xx20 usbbist.mdm StartTest command failed.
6600:xx21 usbbist.mdm GetStatus command failed.
6600:xx22 usbbist.mdm DisableBist command failed.Hardware Diagnostics for DELL

Error Code Module Name Error Text
0200:xx02 adaptec.mdm %s called but not implemented.
0200:xx02 adaptec.mdm Adaptec module hung, cannot continue.
0200:xx02 adaptec.mdm Adapter hardware reset failed.
0200:xx02 adaptec.mdm AllocOSMIOB failed – Out of OSBIOB’s.
0200:xx02 adaptec.mdm Attempt to free memory not in the global memory table.
0200:xx02 adaptec.mdm Auto-Configuration failed.
0200:xx02 adaptec.mdm Cannot access the adapter hardware.
0200:xx02 adaptec.mdm Cannot allocate memory.
0200:xx02 adaptec.mdm Cannot locate the CPU service.
0200:xx02 adaptec.mdm Cannot locate the PCI service.
0200:xx02 adaptec.mdm Cannot locate the reserved memory service.
0200:xx02 adaptec.mdm Constructor failure – Insufficient memory to create device objects.
0200:xx02 adaptec.mdm Could not initialize the adapter.
0200:xx02 adaptec.mdm Found more than 100 controllers – aborting on assumed BIOS error.
0200:xx02 adaptec.mdm FreeOSMIOB passed a NULL pointer.
0200:xx02 adaptec.mdm Initialization code failed – Memory allocation failure at line %d.
0200:xx02 adaptec.mdm IOB reserved memory greater than 4096 bytes.
0200:xx02 adaptec.mdm Out of memory entries in the global memory table.
0200:xx02 adaptec.mdm Reserved memory pointer is NULL.
0200:xx02 adaptec.mdm The adapter is requesting more than 4096 bytes of memory.
0200:xx02 adaptec.mdm Unexpected error encountered : %s.
0300:xx02 ami_raid.mdm fCarveMemory called for %d bytes when only %d bytes are left.
0300:xx02 ami_raid.mdm Initialization code failed. Memory allocation failure at line %d.
0300:xx02 ami_raid.mdm Initialization code failed. Unable to allocate physical memory, only %d pages available.
0300:xx02 ami_raid.mdm Initialization code failed. Unable to map %X into data segment.
0300:xx19 ami_raid.mdm Battery failed: %s
0500:xx02 biosmp.mdm The BIOS MP service failed during initialization. Unable to allocate memory for %s.
0600:xx19 cables.mdm Checking the %s cable to be %s. Cable is currently: %s.
0600:xx1A cables.mdm Checking for detected state of Not Installed. For the %s cable: Expected: %s ; Found: %s .
0600:xx1B cables.mdm There was an error accessing the Super I/O registers for GPI’s.
0600:xx1C cables.mdm There is no valid entry in the test definition table for this test.
0600:xx1D cables.mdm Checking for : %s. Expected input pattern of 0x%04X. Read 0x%04X.
0600:xx1E cables.mdm Did not find a valid riser type for this chassis
0600:xx1F cables.mdm The -rt(list) parameter is required for this test
0600:xx20 cables.mdm Wrong motherboard for this chassis. Chassis : %s Expected motherboard SKU of %s
0600:xx21 cables.mdm Chassis to motherboard combination data is not valid. Processed an invalid pointer
0600:xx22 cables.mdm Chassis to motherboard combination data is incomplete. Ran out of table data before chassis and motherboard
combination was found.
0600:xx23 cables.mdm Chassis ID.
0600:xx24 cables.mdm The -chassis:(list) parameter is required for this test
0600:xx25 cables.mdm Checking for : %s. Expected input pattern of 0x%04X. Read 0x%04X.
0600:xx26 cables.mdm Did not find a valid chassis type for this platform.
0600:xx27 cables.mdm Hardware Detect Error – %s not detected.
0600:xx28 cables.mdm While testing %s, the user indicated the LED color was incorrect. Expected color was : %s
0600:xx29 cables.mdm While testing %s, the user indicated the LED operation was incorrect. Expected: %s
0600:xx2A cables.mdm Insufficient memory.
0700:xx02 cache.mdm Cache size is larger than available test region at line %d
0700:xx02 cache.mdm Cache sizing inconsistent at line %d
0700:xx02 cache.mdm Chipset specific support failed when sizing level 2 cache at line %d
0700:xx02 cache.mdm Error mapping system memory region at line %d
0700:xx02 cache.mdm Failure to create a cache test object at line %d
0700:xx02 cache.mdm Initialization failure. Detected Multiple L2 cache services.
0700:xx02 cache.mdm Initialization failure. L2 cache size is 0 at line %d
0700:xx02 cache.mdm Initialization failure. Unknown L1 organization (%d ways).
0700:xx02 cache.mdm Invalid L1/L2/L3 relationship. L1 size: %lX L2 size: %lX L3 size: %lX.
0700:xx02 cache.mdm Unable to allocate memory for %s.
0700:xx19 cache.mdm The cache improperly changed system memory during an ‘invalidate’ at line %d.
0700:xx1A cache.mdm Cache offset %08Xh miscompare at line %d.
0700:xx1B cache.mdm Level 1 cache failure. Cache offset %08Xh miscompared patterns %08Xh and %08Xh.
0700:xx1C cache.mdm Level 2 cache failure. Cache offset %08Xh miscompared patterns %08Xh and %08Xh during %s pass.
0700:xx1D cache.mdm Level 2 cache failure. Cache offset %08Xh miscompare during %s pass at line %d.
0700:xx1E cache.mdm Level 3 cache failure. Cache offset %08Xh miscompared patterns %08Xh and %08Xh during %s pass.
0700:xx1F cache.mdm Level 3 cache failure. Cache offset %08Xh miscompare during %s pass at line %d.
0B00:xx02 cpu.mdm ACPI table does not contain local APIC info.
0B00:xx02 cpu.mdm The CPU service failed during initialization. Unable to allocate memory for %s.
0B00:xx09 cpu.mdm CpuSvc: The timestamp counter has been reset!
0D00:xx02 ddinit.mim %%s %%s DIAGS 999 999 %%s DDINIT cInit DIAGS_INIT Fail Unable to load system module (%s).
0D00:xx02 ddinit.mim %s %s DIAGS 999 999 %s DDINIT cInit DIAGS_INIT Fail Unable to allocate memory.
0E00:xx02 dellsys.msm Callers buffer overlaps Trace Buffer!
0E00:xx02 dellsys.msm Invalid print buffer command in EMS.
0E00:xx02 dellsys.msm Invalid unit size value passed to EMS fTraceDump.
0E00:xx02 dellsys.msm Subtest called by non-existent main test.
0E00:xx02 dellsys.msm The Dell system module failed during initialization.
0E00:xx02 dellsys.msm This system is not recognized as a supported Dell PC. These diagnostics may not be run on unsupported systems.
0E00:xx02 dellsys.msm Unable to allocate memory for %s.
0E00:xx02 dellsys.msm Unable to map memory.
0E00:xx02 dellsys.msm Unable to record %s name (%s).
0E00:xx02 dellsys.msm Unable to remove %s name (%s).
0F00:xx00 disk.mdm Block %lu: %s (%s).
0F00:xx00 disk.mdm Block %lu: %s.
0F00:xx00 disk.mdm Device initialization failed. %s.
0F00:xx00 disk.mdm IDE device failed: %s (%s).
0F00:xx00 disk.mdm IDE device failed: %s.
0F00:xx00 disk.mdm IDE device failed: %s. Block %lu, Offset %lu – Data was 0x%02X, Should be 0x%02X.
0F00:xx00 disk.mdm Invalid block parameters, beginning block %lu may not be greater than ending block %lu.
0F00:xx00 disk.mdm Invalid disk block percent parameters, beginning value %u may not be greater than ending value %u.
0F00:xx02 disk.mdm Cannot add parameter %s. The parameter type %d is not supported in fAddIDEParams.
0F00:xx02 disk.mdm More than one device claimed the %s compatibility port.
0F00:xx02 disk.mdm Unable to allocate memory for %s.
0F00:xx06 disk.mdm A CD containing data tracks such as a software installation disk is needed for this test.
0F00:xx06 disk.mdm A formatable media must be inserted in the drive to complete this test.
0F00:xx06 disk.mdm A UDF formatted disc is needed for this test.
0F00:xx06 disk.mdm A writeable media must be inserted in the drive to complete this test.
0F00:xx06 disk.mdm An audio CD must be inserted in the drive to complete this test.
0F00:xx06 disk.mdm An erasable media must be inserted in the drive to complete this test.
0F00:xx06 disk.mdm Automatic Acoustic Management is not enabled.
0F00:xx06 disk.mdm Automatic Acoustic Management is not supported.
0F00:xx06 disk.mdm Cannot perform destructive write testing since logical partitions exist on the drive.
0F00:xx06 disk.mdm Cannot perform the test without user interaction.
0F00:xx06 disk.mdm S.M.A.R.T. disabled or not supported.
0F00:xx06 disk.mdm S.M.A.R.T. not supported.
0F00:xx06 disk.mdm The CD inserted in the drive does not contain any data tracks.
0F00:xx06 disk.mdm The command was aborted by the target device.
0F00:xx06 disk.mdm The device does not support this test.
0F00:xx06 disk.mdm The drive does not support play audio from files.
0F00:xx06 disk.mdm The host protected area feature set is not supported.
0F00:xx06 disk.mdm The internal buffer of drive is not large enough for the PCM audio file.
0F00:xx06 disk.mdm The S.M.A.R.T. offline test is not supported.
0F00:xx06 disk.mdm The seek command is not supported after ATA/ATAPI-6
0F00:xx06 disk.mdm This test is only supported on ATAPI devices.
0F00:xx06 disk.mdm Unknown test requested.
0F00:xx06 disk.mdm User chose not not format the media.
0F00:xx06 disk.mdm User chose not to overwrite the tape.
0F00:xx06 disk.mdm User chose not to run tests requiring removable media.
0F00:xx06 disk.mdm User chose not to write to the CD.
0F00:xx06 disk.mdm User must use headphones to continue testing.
0F00:xx19 disk.mdm Command was successful with some recovery action performed
0F00:xx1A disk.mdm Device is not ready
0F00:xx1B disk.mdm Flaw in media or an error in the recorded data. If this is a removable media device, retry the test with different media
0F00:xx1C disk.mdm Non-recoverable hardware error
0F00:xx1D disk.mdm Illegal request (Probably not a hardware problem). If this is a removable media device, retry with different media
0F00:xx1E disk.mdm Reset or media changed
0F00:xx1F disk.mdm Read was requested on a block that is protected
0F00:xx20 disk.mdm Blank check
0F00:xx21 disk.mdm Vendor specific error
0F00:xx22 disk.mdm Copy aborted
0F00:xx23 disk.mdm Aborted command
0F00:xx24 disk.mdm Equal
0F00:xx25 disk.mdm Volume overflow
0F00:xx26 disk.mdm Data compare error
0F00:xx27 disk.mdm Reserved for future use
0F00:xx28 disk.mdm Timeout waiting for drive not busy
0F00:xx29 disk.mdm Expected request for command
0F00:xx2A disk.mdm Expected request for data in
0F00:xx2B disk.mdm Expected request for data out
0F00:xx2C disk.mdm Data transfer count doesn’t match expected count
0F00:xx2D disk.mdm Not enough data was transferred
0F00:xx2E disk.mdm Illegal length indication
0F00:xx2F disk.mdm End of media detected
0F00:xx30 disk.mdm Media change requested
0F00:xx31 disk.mdm An unknown error occurred
0F00:xx32 disk.mdm Timeout waiting for IRQ
0F00:xx33 disk.mdm Timeout waiting for DRQ to be deasserted
0F00:xx34 disk.mdm Timeout waiting for DRDY to be asserted
0F00:xx35 disk.mdm Unknown diagnostic failure
0F00:xx36 disk.mdm Formatter device error
0F00:xx37 disk.mdm Sector buffer error
0F00:xx38 disk.mdm ECC circuitry error
0F00:xx39 disk.mdm Microprocessor error
0F00:xx3A disk.mdm Specified audio track not found
0F00:xx3B disk.mdm No audio output
0F00:xx3C disk.mdm Cannot perform the test, the media is blank, unreadable or not present
0F00:xx3D disk.mdm Incompatible CD or DVD for testing
0F00:xx3E disk.mdm A possible failure is predicted by the drive’s SMART status. It is advisable to immediately back up your data
0F00:xx3F disk.mdm User aborted the test
0F00:xx40 disk.mdm Address mark not found or media error
0F00:xx41 disk.mdm No media in removable media device
0F00:xx42 disk.mdm Address not found
0F00:xx43 disk.mdm Media changed
0F00:xx44 disk.mdm Uncorrectable data error or media is write protected
0F00:xx45 disk.mdm Ultra DMA CRC error detected
0F00:xx46 disk.mdm Drive failed to detect an ECC error
0F00:xx47 disk.mdm Timeout waiting for DSC to be asserted
0F00:xx48 disk.mdm Target drive aborted the command
0F00:xx49 disk.mdm A target or master abort was encountered while transferring data
0F00:xx4A disk.mdm S.M.A.R.T. off-line data collection was never started
0F00:xx4B disk.mdm S.M.A.R.T. off-line data collection was suspended by a host command
0F00:xx4C disk.mdm S.M.A.R.T. off-line data collection was aborted by a host command
0F00:xx4D disk.mdm S.M.A.R.T. off-line data collection was aborted by a fatal error
0F00:xx4E disk.mdm Unknown S.M.A.R.T. off-line data collection status
0F00:xx4F disk.mdm Device Address or Command Select (DA, CS0-) signals are not working
0F00:xx50 disk.mdm Control Select (CS1-) signal is not working
0F00:xx51 disk.mdm The Interrupt Request (INTRQ-) signal is not working
0F00:xx52 disk.mdm The Data signals (DD) are not working
0F00:xx53 disk.mdm A PIO transfer failed. The IORDY signal may not be working correctly
0F00:xx54 disk.mdm The Passed Diagnostics (PDIAG-) signal was not detected
0F00:xx55 disk.mdm Too much data was transferred
0F00:xx56 disk.mdm The removable media in the drive does not match the requested density
0F00:xx57 disk.mdm The self-test routine was aborted by the host
0F00:xx58 disk.mdm The self-test routine was aborted by the host with a hard or soft reset
0F00:xx59 disk.mdm A fatal or unknown error occurred during the self-test routine
0F00:xx5A disk.mdm The self-test failed for an unknown reason
0F00:xx5B disk.mdm The self-test failed the electrical portion of the test
0F00:xx5C disk.mdm The self-test failed the servo portion of the test
0F00:xx5D disk.mdm The self-test failed the read portion of the test
0F00:xx5E disk.mdm An invalid status value was returned by the self-test
0F00:xx5F disk.mdm ATAPI devices do not support the identify device command
0F00:xx60 disk.mdm Timeout waiting for DRQ to be asserted
0F00:xx61 disk.mdm An 80-pin Ultra DMA 66/100 cable was not detected
0F00:xx62 disk.mdm Device initialization failed
0F00:xx63 disk.mdm Error reading logging information
0F00:xx64 disk.mdm Prior DST failure logged in the SMART self-test log
0F00:xx65 disk.mdm IDE CD-RW/DVD+RW format test failed
0F00:xx66 disk.mdm The self-test code took an unexpected path
0F00:xx67 disk.mdm The self-test took too long to run
0F00:xx68 disk.mdm CHS mode is not supported
0F00:xx69 disk.mdm Media is copy protected
0F00:xx6A disk.mdm The requested maximum size is larger than the native drive size
0F00:xx6B disk.mdm Ending block %lu may not be greater than end of physical device %lu
0F00:xx6C disk.mdm Starting block %lu may not be greater than ending block %lu
0F00:xx6D disk.mdm The user specified track is not valid for the disc in the drive
0F00:xx6E disk.mdm The table of contents for the inserted disc is too large to read into memory
0F00:xx6F disk.mdm Cannot use this disc for testing. Please insert another Data disc and try again
0F00:xx70 disk.mdm Optical drive BIST — OPU test failed. Make sure there is no media in the drive.
0F00:xx71 disk.mdm Optical drive BIST — DRAM test failed.
0F00:xx72 disk.mdm Optical drive BIST — Controller (main IC) test failed.
0F00:xx73 disk.mdm Optical drive BIST — FLASH ROM test failed.
0F00:xx74 disk.mdm Optical drive BIST — Tray In test failed. Check for obstruction.
0F00:xx75 disk.mdm Optical drive BIST — Tray Out test failed. Check for obstruction.
0F00:xx76 disk.mdm Optical drive BIST — Spindle test failed.
0F00:xx77 disk.mdm Optical drive BIST is not supported by this drive.
0F00:xx78 disk.mdm Drive total logical blocks %ld is in between defined sizes %ld \”%s\” and %ld \”%s\”
0F00:xx79 disk.mdm Failed to set AAM level. Expected value = 0x%02X, actual value = 0x%02X
0F00:xx7A disk.mdm The length of the feature buffer is too small, must be at least 4 bytes
0F00:xx7B disk.mdm Blank media or no media is present in optical drive. Test requires media with data (Resource CD, Installation CD)
0F00:xx7C disk.mdm The media is still in the device
0F00:xx7D disk.mdm The tray of optical device is not out.
0F00:xx7E disk.mdm Media contains audio data only. Test requires media with data tracks (Resource CD, Installation CD)
1100:xx00 diskette.mdm The test may not be run because the device does not support the change line detection feature.
1100:xx02 diskette.mdm An invalid parameter selection index of %d was specified in file %s, at line:%d.
1100:xx02 diskette.mdm An invalid test selection index of %d was specified in file %s, at line:%d.
1100:xx02 diskette.mdm Attempted to create an error description of a successful BIOS status.
1100:xx02 diskette.mdm Data comparison was requested for %u blocks, actual block sizes are %u and %u.
1100:xx02 diskette.mdm Diskette data buffer expected but not supplied in %s, at line %d.
1100:xx02 diskette.mdm Diskette drive test function entered without a system test context established.
1100:xx02 diskette.mdm Memory Allocation Error. Unable to allocate %s object
1100:xx02 diskette.mdm Unable to allocate a real mode addressable memory buffer of %u bytes.
1100:xx02 diskette.mdm Unable to allocate memory for a \”%s\” object of size %u bytes in %s, at line %d.
1100:xx19 diskette.mdm The value for the %s parameter (%u) may not be greater than the value for the %s parameter (%u).
1100:xx1A diskette.mdm The value for the \”%s\” (\”%s\”) (%u) may not be less than the minium value of %u.
1100:xx1B diskette.mdm The value for the \”%s\” (\”%s\”) (%u) may not be greater than the maximum value of %u.
1100:xx1C diskette.mdm The change line test has been failed at the user’s instruction.
1100:xx1D diskette.mdm The expected change line event was not detected.
1100:xx1E diskette.mdm The test was ended by user request.
1100:xx1F diskette.mdm The data written to and read back from the diskette media are not equivalent as expected. The diskette should be considered
corrupted.
1100:xx20 diskette.mdm The cylinder parameters are not compatible with the device’s cylinder range.
1100:xx21 diskette.mdm A system disk BIOS operation failed with the error code of %2.2Xh.
1100:xx22 diskette.mdm The system’s BIOS reported a \”Bad command\” status in response to the command code %2.2Xh
1100:xx23 diskette.mdm The system BIOS reported an access failure on the diskette media. Write-protection on the diskette should be disabled
and the test retried.
1100:xx24 diskette.mdm The BIOS could not operate on the location at %s, which may specify an invalid position for the diskette drive or media.
1100:xx25 diskette.mdm A status code returned by the BIOS indicates a device reset failure.
1100:xx26 diskette.mdm An uncorrectable Cyclic Redundancy Check (CRC) or Error Code Correction (ECC) data error occurred on the media at %s.
1100:xx27 diskette.mdm The BIOS reported that a correctable (soft) data error occurred on the diskette, which indicates that redundant
error code information was sufficient to correct the error.
1100:xx28 diskette.mdm The system’s BIOS status indicates that the diskette controller (a microprocessor which controls the diskette drive)
failed to operate correctly.
1100:xx29 diskette.mdm The BIOS status indicates the the seek operation (positioning the drive’s heads to location %s) failed.
1100:xx2A diskette.mdm The drive did not respond in a fixed time to an access attempt.
1100:xx2B diskette.mdm This test is checking for media in the drive. Verify media was not write-protected and was properly inserted into the drive.
1100:xx2C diskette.mdm This test is checking that media has been removed from the drive. Verify media was removed from the drive.
1400:xx02 dvd.mdm Initialization failure. Unable to allocate memory for %s.
1400:xx19 dvd.mdm Unable to read interrupt from PCI Configuration space.
1B00:xx19 genaudio.mdm Could not create the Audio CD service object.
1B00:xx19 genaudio.mdm Could not create the Crystal Audio Module object
1B00:xx1A genaudio.mdm Could not create the \”%s\” help object.
1B00:xx1B genaudio.mdm The user’s response indicated a failure.
1B00:xx1C genaudio.mdm Insufficient memory.
1B00:xx1E genaudio.mdm Was unable to initialize the hardware for playback.
1B00:xx1F genaudio.mdm Audio synthesized tone sound was not heard.
1B00:xx20 genaudio.mdm Audio analog playback was not heard.
1B00:xx21 genaudio.mdm Audio from the line input was not heard.
1B00:xx22 genaudio.mdm Audio volume controls do not appear to be functioning.
1B00:xx23 genaudio.mdm Recorded audio was not heard.
1B00:xx24 genaudio.mdm Audio Invalid Base Address.
1B00:xx25 genaudio.mdm The audio controller did not generate any interrupts from its internal timer.
1B00:xx26 genaudio.mdm The audio controller generated an incorrect number of interrupts from its internal timer.
1B00:xx27 genaudio.mdm Expected to generate %u interrupts, actually generated %u.
1B00:xx29 genaudio.mdm At least one of the playback channel parameters (left, right, and both) must be set to \”Yes\”.
1B00:xx2A genaudio.mdm Not able to set volume.
1B00:xx2B genaudio.mdm Not able to set master volume.
1B00:xx2C genaudio.mdm Audio service reported an error while reporting the number of speakers on the system.
1B00:xx2D genaudio.mdm The audio service (fGetNumOfSpeakers) reported an error.
1B00:xx2E genaudio.mdm CDROM track did not match expected characteristics
1B00:xx2F genaudio.mdm Analysis did not find a Frequency point of 9000 Hz. Verify CD audio cable is attached between CD-drive and CD-in
connector on system board.
1B00:xx30 genaudio.mdm Power at 9000 Hz less than 2 percent
1B00:xx31 genaudio.mdm Power at Secondary Frequency greater than 1 percent
1B00:xx32 genaudio.mdm CDROM Service failed
1B00:xx33 genaudio.mdm CDROM device not found. CDROM device may not be enabled in system setup, wrong device requested for this test,
or CD-drive IDE cable is not connected.
1B00:xx34 genaudio.mdm The user indicates that no message was heard.
1B00:xx35 genaudio.mdm User has cancelled the test.
1B00:xx36 genaudio.mdm Failed to generate the wave for playing
1B00:xx37 genaudio.mdm The recorded wave information does not match with the source wave information.
1B00:xx38 genaudio.mdm Failed to analyze the recorded wave information
1B00:xx39 genaudio.mdm Analysis did not find the peak power point to also be the frequency point of 9000 Hz.
1B00:xx3A genaudio.mdm Check cable to internal microphone. Analysis says that Right Channel is bad.
1B00:xx3B genaudio.mdm Check cable to internal microphone. Analysis says that Left Channel is bad.
1B00:xx3C genaudio.mdm Check cable to internal microphone. Analysis says that Both (left/right) Channels are bad.
2200:xx64 iaudio.mdm A timeout occurred while trying to access an AC97 register.
2200:xx65 iaudio.mdm Read %Xh at AC97 register %Xh, expected %Xh.
2200:xx65 iaudio.mdm The hub (SB/ICH) AC’97 audio service failed during initialization.
2200:xx66 iaudio.mdm A timeout occurred while waiting for the audio controller to generate a record interrupt.
2200:xx66 iaudio.mdm Unable to allocate memory for %s.
2200:xx67 iaudio.mdm A timeout occurred while waiting for the audio controller to generate a playback interrupt.
2200:xx68 iaudio.mdm A timeout occurred while waiting for the audio controller to generate an interrupt.
2200:xx69 iaudio.mdm A wave file parameter is not supported by this service.
2200:xx6A iaudio.mdm Primary codec is not ready.
2200:xx6B iaudio.mdm Not enough buffer size
2200:xx6C iaudio.mdm A timeout occurred while trying to access AC97 CODEC register %Xh.
2300:xx02 ieee1394.mdm Initialization failure. Unable to allocate memory for %s.
2300:xx1F ieee1394.mdm Invalid bus identification content. Expected %Xh but found %Xh.
2300:xx20 ieee1394.mdm ATRQ command register access failed. Expected %Xh but found %Xh.
2300:xx21 ieee1394.mdm PHY register reading times out.
2300:xx22 ieee1394.mdm PHY register writing times out.
2300:xx23 ieee1394.mdm PHY register access failed. Expected %Xh but found %Xh.
2300:xx24 ieee1394.mdm Invalid interrupt count. Expected %Xh but found %Xh.
2400:xx02 imchecc.mdm Failed to allocate memory for the IMchEcc module.
2400:xx02 imchecc.mdm Illegal function call.
2400:xx02 imchecc.mdm Line %d. Illegal attempt to modify register without restoring original value first.
2400:xx02 imchecc.mdm Line %d. Illegal attempt to restore register without first saving the initial state.
2600:xx02 ioapic.mdm %d paragraphs of memory are available below 1 MB and the test needs %d paragraphs.
2600:xx02 ioapic.mdm Initialization failure. Unable to allocate memory for %s.
2600:xx02 ioapic.mdm Unable to reserve GDT entry for code usage.
2600:xx19 ioapic.mdm Unable to set I/O APIC ID. Tried to set the ID to %02Xh, but it read back as %02Xh.
2600:xx1A ioapic.mdm Unexpected interrupt found. Interrupt %02Xh occurred at address %04X:%08Xh (offset %04Xh in the module).
2600:xx1B ioapic.mdm Wrong interrupt count. Attempted to generate %d interrupts, but %d were generated.
2600:xx1C ioapic.mdm Auxiliary processor has failed. CPU (%02Xh) did not transition to protected mode.
2600:xx1D ioapic.mdm Auxiliary processor has failed. Unable to issue STARTUP message to CPU (%02Xh).
2600:xx1E ioapic.mdm Auxiliary processor has failed. Unable to issue INIT message to CPU (%02Xh).
2600:xx1F ioapic.mdm Unable to relocate the code to start the other processors to below 1 MB.
2600:xx20 ioapic.mdm Auxiliary processor has failed. CPU (%02Xh) failed to respond.
2600:xx21 ioapic.mdm Internal program error. No space left in the control tables to manage an additional CPU.
2600:xx22 ioapic.mdm Unable to stop non-boot processors. The system might be unstable and should be rebooted.
2600:xx23 ioapic.mdm Auxiliary processor has failed. Unable to send a command to CPU %02Xh.
2600:xx24 ioapic.mdm Auxiliary processor has failed. Unable to get a result from CPU %02Xh.
2600:xx25 ioapic.mdm Realtime clock divider chain setting is wrong and the RTC cannot be used for timing.
2600:xx26 ioapic.mdm Internal program error. Unable to locate the CPU with APIC ID %02Xh in the control tables.
2600:xx27 ioapic.mdm Internal program error. Code segment corruption was detected.
2600:xx28 ioapic.mdm Internal program error. Unknown error (%02Xh) during the test.
2600:xx29 ioapic.mdm Unable to create memory mapping for I/O APIC or the local APIC.
2A00:xx02 ir.mdm Initialization failure. Unable to allocate memory for %s.
2A00:xx19 ir.mdm IR port is not working properly. Failed checking UART INT_EN reg static bits.
2A00:xx1A ir.mdm IR port is not working properly. Failed checking UART INT_ID reg static bits.
2A00:xx1B ir.mdm IR port is not working properly. Failed checking MCR reg static bits.
2A00:xx1C ir.mdm IR port is not working properly. Failed clearing LSR bits.
2A00:xx1D ir.mdm IR port is not working properly. Failed clearing MSR bits.
2A00:xx1E ir.mdm IR port is not working properly. Failed checking IID static bits.
2A00:xx1F ir.mdm IR port is not working properly. Failed checking THRE & TXMT bits in LSR.
2A00:xx20 ir.mdm IR port is not working properly. Failed basic Scratch Reg test.
2A00:xx21 ir.mdm IR port is not working properly. Found UART, but not 550A.
2A00:xx22 ir.mdm IR port is not working properly. Failed complete scratch reg test.
2A00:xx23 ir.mdm IR port is not working properly. No interrupt received.
2A00:xx24 ir.mdm IR port is not working properly. Timeout waiting for Tx to empty.
2A00:xx25 ir.mdm IR port is not working properly. Failed trying to empty Rx.
2A00:xx26 ir.mdm IR port is not working properly. Timed out waiting for 0x%02X loopBack.
2A00:xx27 ir.mdm IR port is not working properly. After Tx=0x%02X, Rx=0x%02X, failed test.
2A00:xx28 ir.mdm IR port is not working properly. Invalid frame size received exp=%d rcv=%d loop=%d.
2A00:xx29 ir.mdm IR port is not working properly. Invalid data received exp=%x rcv=%x index=%d loop=%d.
2A00:xx2A ir.mdm IR port is not working properly. Invalid frame size %d.
2A00:xx2B ir.mdm IR port is not working properly. Send frame failed, THRE timeout.
2A00:xx2C ir.mdm IR port is not working properly. Send frame failed, TEMT timeout.
2A00:xx2D ir.mdm IR port is not working properly. Failed reading SMC_ID_HI, data = 0x%02X, s/b 0×10.
2A00:xx2E ir.mdm IR port is not working properly. Failed reading SMC_ID_LO, data = 0x%02X, s/b 0xB8.
2A00:xx2F ir.mdm IR port is not working properly. Failed reading CHIP_ID, data = 0x%02X, s/b 0xF1 or 0xF2.
2A00:xx30 ir.mdm IR port is not working properly. No interrupt received.
2A00:xx31 ir.mdm IR port is not working properly. Failed checking BofLow reg., data = 0x%02X.
2A00:xx32 ir.mdm IR port is not working properly. FIFO not empty after reset!.
2A00:xx33 ir.mdm IR port is not working properly. FIFO full early, count=%d.
2A00:xx34 ir.mdm IR port is not working properly. FIFO not full after 128 bytes.
2A00:xx35 ir.mdm IR port is not working properly. Failed reading back FIFO got 0x%02X, s/b 0x%02X.
2A00:xx36 ir.mdm IR port is not working properly. FIFO empty early, count=%d.
2A00:xx37 ir.mdm IR port is not working properly. FIFO not empty after 128 bytes.
2A00:xx38 ir.mdm IR port is not working properly. DMA channel not configured by BIOS.
2A00:xx39 ir.mdm IR port is not working properly. Failed, could not allocate DMA buffer.
2A00:xx3A ir.mdm IR port is not working properly. Failed, DmaSize=%d, s/b %d.
2A00:xx3B ir.mdm IR port is not working properly. Failed, byte %d = 0x%02X, s/b 0x%02X.
2A00:xx3C ir.mdm IR port is not working properly. Failed, fifo full @ i=%d.
2A00:xx3D ir.mdm IR port is not working properly. Timed out waiting for EOM, i=%d.
2A00:xx3E ir.mdm IR port is not working properly. Failed, MsgCnt = %d.
2A00:xx3F ir.mdm IR port is not working properly. Failed, fifo empty @ i=%d.
2A00:xx40 ir.mdm IR port is not working properly. Failed, bad data = 0x%02X, s/b i=0x%02X.
2A00:xx41 ir.mdm IR port is not working properly. Failed, fifo NOT empty at end of test.
2A00:xx42 ir.mdm IR port is not working properly. Failed, LSR = 0x%02X.
2A00:xx43 ir.mdm IR port is not working properly. Failed, could not allocate DMA buffer.
2A00:xx44 ir.mdm IR port is not working properly. Invalid frame size received exp=%d rcv=%d loop=%d.
2A00:xx45 ir.mdm IR port is not working properly. Invalid data received exp=%x rcv=%x index=%d loop=%d.
2A00:xx46 ir.mdm IR port is not working properly. Failed, could not allocate DMA buffer.
2A00:xx47 ir.mdm IR port is not working properly. Invalid frame size %d.
2A00:xx48 ir.mdm IR port is not working properly. Transmit EOM timeout.
2A00:xx49 ir.mdm IR port is not working properly. Transmit message count error.
2A00:xx4A ir.mdm IR port is not working properly. Transmit line status register error, LSR=%x.
2A00:xx4B ir.mdm IR port is not working properly. Receiver timeout waiting for frame.
2A00:xx4C ir.mdm IR port is not working properly. Rx message count error.
2A00:xx4D ir.mdm IR port is not working properly. Rx FIFO timeout.
2A00:xx4E ir.mdm IR port is not working properly. Rx line status register error, LSR=%x.
2A00:xx4F ir.mdm IR port is not working properly. Invalid host test code %d.
2A00:xx50 ir.mdm IR port is not working properly. Communication could not be established with host.
2A00:xx51 ir.mdm IR port is not working properly. Invalid IRQ %d.
2A00:xx52 ir.mdm IR port is not working properly. Failed, DMA buffer pointer not setup.
2A00:xx53 ir.mdm IR port is not working properly. Failed, invalid DMA channel %d.
2A00:xx54 ir.mdm IR port is not working properly. Failed, invalid DMA count %d.
2C00:xx02 keyboard.mdm Unable to allocate memory for %s.
2C00:xx19 keyboard.mdm Unable to read keyboard %s port. Read 0xFFFF from the port.
2C00:xx1A keyboard.mdm Unable to read keyboard test inputs. A read of the keyboard controller’s test port returned all ones.
2C00:xx1B keyboard.mdm The user indicated that the results of the test were unsatisfactory.
2C00:xx1C keyboard.mdm The test was stopped before all keys on the keyboard were pressed.
2C00:xx1D keyboard.mdm Stuck key detected. The keyboard is continuously transmitting a scan code of %Xh.
2C00:xx1E keyboard.mdm Keyboard wizard had trouble communication with the output file.
2C00:xx1F keyboard.mdm No hot keys detected.
2C00:xx20 keyboard.mdm The user exceeded the maximum number of retries allowed.
2C00:xx21 keyboard.mdm Stuck key detected. The keyboard is continuously transmitting a scan code.
2C00:xx22 keyboard.mdm Wireless keyboard not docked.
2C00:xx23 keyboard.mdm Error retreiving docked status of wireless keyboard.
2C00:xx24 keyboard.mdm The user indicated the %s LED was not functioning.
2C00:xx25 keyboard.mdm Env var kbleds set to invalid value
2F00:xx02 memory.mdm Allocated memory was found to be unreliable.
2F00:xx02 memory.mdm Failed to allocate memory for a test buffer.
2F00:xx02 memory.mdm Failed to allocate memory for copy of test block.
2F00:xx02 memory.mdm Failed to allocate memory for relocation of test code.
2F00:xx02 memory.mdm Failed to allocate memory for relocation of the LDT.
2F00:xx02 memory.mdm Failed to allocate memory for the channel mode parameter.
2F00:xx02 memory.mdm Failed to allocate memory for the Channel Mode test.
2F00:xx02 memory.mdm Failed to allocate memory for the DIMM Temperature test.
2F00:xx02 memory.mdm Failed to allocate memory for the dual channel parameter.
2F00:xx02 memory.mdm Failed to allocate memory for the Dual Channel test.
2F00:xx02 memory.mdm Failed to allocate memory for the memory device.
2F00:xx02 memory.mdm Failed to allocate memory for the memory module.
2F00:xx02 memory.mdm Failed to allocate memory for the memory temperature parameter.
2F00:xx02 memory.mdm Failed to allocate memory for the Memory Test Services.
2F00:xx02 memory.mdm Failed to allocate memory for the table of available memory blocks.
2F00:xx02 memory.mdm Failed to allocate memory for the TLB cache page memory blocks.
2F00:xx02 memory.mdm Failed to allocate real memory.
2F00:xx02 memory.mdm Memory sizing error reported by BIOS.
2F00:xx02 memory.mdm Required service, %s, not found.
2F00:xx02 memory.mdm Unable to locate table of available memory blocks.
2F00:xx02 memory.mdm Unable to locate the memory controller device.
2F00:xx1D memory.mdm Memory is not operating in the expected channel mode
2F00:xx1E memory.mdm Memory temperature exceeds the specified threshold
3100:xx02 miscpci.mdm Device initialization failure. Unable to allocate memory for %s at line %d.
3100:xx19 miscpci.mdm No BIOS support for SMI interface function.
3100:xx1A miscpci.mdm Required parameter does not exist.
3100:xx1B miscpci.mdm Expected: VID = %x DID = %x Found: VID = %x DID = %x.
3500:xx01 mouse.mdm The user has requested an abort of the currently executing test.
3500:xx02 mouse.mdm %s: Can not locate %s (%d)
3500:xx02 mouse.mdm Memory allocation failure creating %s.
3500:xx03 mouse.mdm Unknown mouse type. The test was called with an unknown type of %Xh.
3500:xx06 mouse.mdm This test must be run in interactive mode.
3500:xx19 mouse.mdm Could not disable mouse. The keyboard controller did not acknowledge a mouse disable command.
3500:xx1A mouse.mdm Could not disable keyboard. The keyboard controller did not acknowledge a keyboard disable command.
3500:xx1B mouse.mdm Could not set sampling rate. The keyboard controller did not accept a command to set the mouse’s data sampling rate.
3500:xx1C mouse.mdm Could not enable mouse. The keyboard controller did not acknowledge a mouse enable command.
3500:xx1D mouse.mdm Could not enable keyboard. The keyboard controller did not acknowledge a keyboard enable command.
3500:xx1E mouse.mdm A parity error was detected. The keyboard controller status indicates a data parity (corrupted data) error.
3500:xx1F mouse.mdm Keyboard transmit timeout error. The keyboard controller failed to accept data within 0.0%u seconds.
3500:xx20 mouse.mdm Keyboard receive timeout error. The keyboard controller failed to receive data within 0.0%u seconds.
3500:xx21 mouse.mdm Timer expired before any keyboard or mouse data was found.
3500:xx22 mouse.mdm Both buttons were detected as pressed.
3600:xx02 nbbatt.mdm Initialization failure. Unable to allocate memory for %s.
3600:xx02 nbbatt.mdm Unable to map data buffer local.
3600:xx1A nbbatt.mdm Battery test failed – Charger should be shown as charging battery.
3600:xx1B nbbatt.mdm Battery test failed – Charger should not be shown as charging battery.
3600:xx22 nbbatt.mdm Battery test failed – reporting disconnected charger.
3600:xx23 nbbatt.mdm Battery test failed – reporting attached charger.
3600:xx29 nbbatt.mdm Reporting connected charger.
3600:xx33 nbbatt.mdm Error reported while communicating with the battery.
3600:xx3D nbbatt.mdm Battery register Error reported.
3600:xx3E nbbatt.mdm Invalid Battery register specified.
3600:xx47 nbbatt.mdm Read AC adaptor function not supported.
3600:xx49 nbbatt.mdm Invalid AC adaptor reported.
3600:xx4A nbbatt.mdm Invalid AC adaptor function specified.
3600:xx51 nbbatt.mdm Error reported while communicating with SMBIOS service.
3600:xx52 nbbatt.mdm Permanent battery failure detected.
3600:xx53 nbbatt.mdm Battery can no longer provide sufficient power to your system.
3600:xx5B nbbatt.mdm Battery currently not charging.
3700:xx02 nbfan.mdm %s: Can not locate %s (%d)
3700:xx02 nbfan.mdm Initialization failure. Unable to allocate memory for %s.
3700:xx19 nbfan.mdm Fan not running at correct speed or fan sensor incorrect
3700:xx1A nbfan.mdm Fan test failed for fan %s. Reason: %s
3700:xx1B nbfan.mdm Expected %s %s RPM of %d. Detected fan RPM = %d.
3700:xx1C nbfan.mdm For %s : Invalid fan RPM detected. Detected fan RPM = %d.
3700:xx1D nbfan.mdm Currently %s RPM exceeds limit value. Detected fan RPM = %d, limit fan RPM = %d
3800:xx02 nbsvc.mdm %s: All required structures are not supported
3800:xx02 nbsvc.mdm %s: Can not locate %s (%d)
3800:xx02 nbsvc.mdm %s: Unrecognized Interface Version of %x.
3800:xx02 nbsvc.mdm Initialization failure. Unable to allocate memory for %s.
3900:xx02 nbtherm.mdm %s: Can not locate %s (%d)
3900:xx02 nbtherm.mdm Initialization failure. Unable to allocate memory for %s.
3900:xx25 nbtherm.mdm Time-out waiting for %dC temperature decrease, startTemp=%dC, lastTemp=%dC
3900:xx26 nbtherm.mdm Temperature sensor out of range, temp=%dC, min=%dC, max=%dC
3900:xx27 nbtherm.mdm Maximum temperature increase of %dC exceeded, startTemp=%dC, lastTemp=%dC
3900:xx28 nbtherm.mdm System is clock throttled.
3900:xx29 nbtherm.mdm Temperature sensor did not change value during test.
3900:xx2A nbtherm.mdm CPU is clock throttled.
3900:xx2B nbtherm.mdm The throttle parameter is incompatible with this CPU.
3900:xx2C nbtherm.mdm Maximum allowable temperature of %3dC reached.
3900:xx2D nbtherm.mdm The safe temperature of %3dC reached.
3B00:xx02 nic.mdm Adapter is not 10Base-T or 100Base-TX.
3B00:xx02 nic.mdm Adapter is not 10Base-T.
3B00:xx02 nic.mdm Bus Mastering disabled.
3B00:xx02 nic.mdm Initialization failure. Unable to allocate memory for %s.
3B00:xx19 nic.mdm Invalid manufacturer code. Expected %Xh but found %Xh.
3B00:xx1A nic.mdm Invalid device ID. Expected %Xh but found %Xh.
3B00:xx1B nic.mdm Word I/O failed for data pattern. Expected %Xh but found %Xh.
3B00:xx1C nic.mdm Byte I/O failed for data pattern %Xh. Expected %Xh but found %Xh.
3B00:xx1D nic.mdm Window change failed. Unable to select window %d.
3B00:xx1E nic.mdm Fast read of alternate value failed.
3B00:xx1F nic.mdm Station address register test failed.
3B00:xx20 nic.mdm EEPROM failure detected. Expected a ‘data’ checksum of %Xh but found %Xh.
3B00:xx21 nic.mdm EEPROM failure detected. Expected a ’secondary data’ checksum of %Xh but found %Xh.
3B00:xx22 nic.mdm EEPROM failure detected. Expected a ‘config’ checksum of %Xh but found %Xh.
3B00:xx23 nic.mdm EEPROM failure detected. Expected a ’secondary config’ checksum of %Xh but found %Xh.
3B00:xx24 nic.mdm Invalid interrupt count. Expected %Xh but found %Xh.
3B00:xx25 nic.mdm MII physical layer failed. Register %Xh access failed, value=%Xh.
3B00:xx26 nic.mdm MII physical layer failed. Reset timeout.
3B00:xx27 nic.mdm MII physical layer failed. Reset failed, control register %Xh.
3B00:xx28 nic.mdm MII physical layer failed. Expected: %Xh Actual: %Xh Register: %Xh.
3B00:xx29 nic.mdm Receive frame failed. Data does not match the transmit frame (size=%d).
3B00:xx2A nic.mdm Non-specific adapter failure. Status register has a generic Fail bit set.
3B00:xx2B nic.mdm Transmit frame failed. Timeout, size=%d, STATUS=%Xh.
3B00:xx2C nic.mdm Transmit frame failed. Jabber error.
3B00:xx2D nic.mdm Transmit frame failed. Underrun error.
3B00:xx2E nic.mdm Transmit frame failed. Maximum collisions reached.
3B00:xx2F nic.mdm Transmit frame failed. Status overflow.
3B00:xx30 nic.mdm Receive frame failed. Timeout, size=%d, STATUS=%Xh.
3B00:xx31 nic.mdm Receive frame failed. Receiver error (size=%d, RX_STATUS=%Xh, RX_ERROR=%Xh).
3B00:xx32 nic.mdm Receive frame failed. Invalid size, expected %d, but received %d.
3B00:xx33 nic.mdm Width test failed. No room in adapter FIFO.
3B00:xx34 nic.mdm Width test failed. Timeout.
3B00:xx35 nic.mdm Width test failed. Invalid size.
3B00:xx36 nic.mdm Width test failed. Invalid data.
3B00:xx37 nic.mdm Pattern test failed. No room in adapter FIFO.
3B00:xx38 nic.mdm Pattern test failed. Timeout.
3B00:xx39 nic.mdm Pattern test failed. Invalid size.
3B00:xx3A nic.mdm Pattern test failed. Invalid data.
3B00:xx3B nic.mdm Non-specific adapter failure. Low level code %d.
3B00:xx3C nic.mdm Low level error adapter failure. Adapter command timeout error.
3B00:xx3D nic.mdm Low level error adapter failure. EEPROM access timeout error.
3B00:xx3E nic.mdm Low level error adapter failure. EEPROM product ID is mismatched with physical layer card.
3B00:xx3F nic.mdm Low level error adapter failure. MII physical layer not responding.
3B00:xx40 nic.mdm Invalid adapter configuration. The adapter was marked ‘bad’ during initialization.
3B00:xx41 nic.mdm Invalid adapter configuration. EISA adapter in ISA machine.
3B00:xx42 nic.mdm Transmit frame failed. No room in adapter FIFO.
3B00:xx43 nic.mdm Transmit frame failed. Timeout waiting for data to transmit.
3B00:xx44 nic.mdm Unable to issue a command to the adapter. Command %04Xh returned a code of %d.
3B00:xx45 nic.mdm Adapter failed to complete a command. Download to fifo failed to complete.
3B00:xx46 nic.mdm Adapter failed to complete a command. Data not looped back to receive FIFO.
3B00:xx47 nic.mdm Adapter failed to complete a command. Upload from fifo failed to complete.
3B00:xx48 nic.mdm Receive frame failed. Incomplete packet received.
3B00:xx49 nic.mdm Receive frame failed. Unknown receiver error.
3B00:xx4A nic.mdm Receive frame failed. Overrun error.
3B00:xx4B nic.mdm Receive frame failed. Oversize error.
3B00:xx4C nic.mdm Receive frame failed. Undersize error.
3B00:xx4D nic.mdm Receive frame failed. Framing error.
3B00:xx4E nic.mdm Receive frame failed. CRC error.
3B00:xx4F nic.mdm Receive frame failed, overflow status.
3B00:xx50 nic.mdm Transmit frame failed. No room in FIFO, size=%d.
3B00:xx51 nic.mdm Pattern test failed. Register %s Expected: %Xh Actual: %Xh.
3B00:xx52 nic.mdm Command failure. SRPR register bank %d select failed (%Xh).
3B00:xx53 nic.mdm Pattern test failed. %s stuck bits after reset (%Xh).
3B00:xx54 nic.mdm Pattern test failed. UISR_EV stuck interrupt bits after reset (%Xh).
3B00:xx55 nic.mdm Interrupt failure. Access error interrupt to register failed (error=%d).
3B00:xx56 nic.mdm Interrupt failure. Access error interrupt to shared RAM failed (error=%d).
3B00:xx57 nic.mdm Interrupt failure. Timer interrupt failed (error=%d).
3B00:xx58 nic.mdm Pattern test failed. Expected %Xh and found %Xh at %X:%Xh.
3B00:xx59 nic.mdm Adapter ‘Open’ failed. No interrupt, error=%d.
3B00:xx5A nic.mdm Adapter ‘Open’ failed. Retcode=%Xh, error_code=%Xh.
3B00:xx5B nic.mdm Receive frame failed. Error=%d.
3B00:xx5C nic.mdm Receive frame failed. Retcode=%Xh.
3B00:xx5D nic.mdm Receive frame failed. No interrupt.
3B00:xx5E nic.mdm Receive frame failed. Completion failed (no interrupt).
3B00:xx5F nic.mdm Receive frame failed. Completion failed (retcode=%Xh).
3B00:xx60 nic.mdm Receive frame failed. Error=%d.
3B00:xx61 nic.mdm Receive frame failed. No interrupt.
3B00:xx62 nic.mdm Receive frame failed. Length is wrong (rcv_length=%d tx_length=%d).
3B00:xx63 nic.mdm Receive frame failed. Invalid data (rcv=%Xh tx=%Xh index=%d).
3B00:xx64 nic.mdm Adapter ‘Close’ failed. No interrupt, error=%d.
3B00:xx65 nic.mdm Adapter ‘Close’ failed. Retcode=%Xh.
3B00:xx66 nic.mdm Initialization failure. Reset failed (no interrupt, error=%d).
3B00:xx67 nic.mdm Initialization failure. Reset failed (bad SRB address).
3B00:xx68 nic.mdm Initialization failure. Invalid initialization command (cmd=%Xh).
3B00:xx69 nic.mdm On-board diagnostic failed (bring_up_code=%Xh).
3B00:xx6A nic.mdm Network Inteface Controller : Self Test Failure
3B00:xx6B nic.mdm Invalid Checksum. Expected %04X. Read %04X.
3B00:xx6C nic.mdm Timeout Waiting for SCB
3B00:xx6D nic.mdm Command %X Failed to execute
3B00:xx6E nic.mdm Unable to Stop Receive Unit, Status=%X
3B00:xx6F nic.mdm Full Duplex not implemented
3B00:xx70 nic.mdm Command Timeout for Send Packet
3B00:xx71 nic.mdm Command Timeout for Wait Packet
3B00:xx72 nic.mdm Data Signature did not match
3B00:xx73 nic.mdm Packet Number did not match
3B00:xx74 nic.mdm Fail : Network Interface Internal Loopback Test. Result code %04Xh. Attempting %s
3B00:xx81 nic.mdm EEPROM timeout failure. Adapter error code : %d.
3B00:xx81 nic.mdm EEPROM timeout failure. Reading EEPROM during Checksum Test. Adapter error code : %d.
3B00:xx81 nic.mdm EEPROM timeout failure. Reading manufacture information during Checksum Test. Adapter error code : %d.
3B00:xx81 nic.mdm EEPROM timeout failure. Write to EEPROM during EEPROM Read/Write Test. Adapter error code : %d.
3B00:xx82 nic.mdm Indirect Register Test Failed. Expected %08Xh but read %08Xh.
3B00:xx83 nic.mdm Read only bit changed after writing 0’s to the test bits at offset %04Xh. Read %08Xh.
3B00:xx84 nic.mdm Read/Write bit did not clear after writing 0’s to the test bits at offset %04Xh. Read %08Xh.
3B00:xx85 nic.mdm Read only bit changed after writing 1’s to test bits at offset %04Xh. Read %08Xh.
3B00:xx86 nic.mdm Read/Write bit did not get set after writing 1’s to test bits at offset %04Xh. Read %08Xh.
3B00:xx87 nic.mdm Invalid interrupt count. Expected %Xh but received %Xh.
3B00:xx88 nic.mdm EEPROM failure detected. Expected a Boot Strap checksum of %04Xh but read %04Xh.
3B00:xx89 nic.mdm EEPROM failure detected. Expected a Manufacturing information checksum of %04Xh but read %04Xh.
3B00:xx8A nic.mdm EEPROM failure detected. Expected a value of %08Xh but read %08Xh.
3B00:xx8B nic.mdm Built in Self Test failure detected.
3B00:xx8C nic.mdm DMA read failure detected.
3B00:xx8D nic.mdm DMA write failure detected.
3B00:xx8E nic.mdm DMA failure detected. Expected a value of %08Xh but found %08Xh.
3B00:xx8F nic.mdm Reset adapter failed. Timeout waiting for offset %04Xh.
3B00:xx90 nic.mdm Internal Loopback failure detected. Too many fragments for one packet.
3B00:xx91 nic.mdm Internal Loopback failure detected. Fail to send packets out.
3B00:xx92 nic.mdm Expected to Transmit %d packet(s) but only %d were transmitted.
3B00:xx93 nic.mdm Expected to Receive %d packet(s) but only %d were received.
3B00:xx94 nic.mdm Memory malloc failed for %s.
3B00:xx95 nic.mdm FATAL. Null packet descriptor pointer
3B00:xx96 nic.mdm Link is down
3B00:xx97 nic.mdm Timeout reset to register addr %ph, read %08lxh, bit %08xh did not clear
3B00:xxAB nic.mdm Self Test Failure
3B00:xxAC nic.mdm Invalid Checksum. Expected %04X. Read %04X.
3B00:xxAD nic.mdm Timeout Waiting for SCB
3B00:xxAE nic.mdm Command %X Failed to execute
3B00:xxAF nic.mdm Unable to Stop Receive Unit, Status=%X
3B00:xxB0 nic.mdm Full Duplex not implemented
3B00:xxB1 nic.mdm Command Timeout for Send Packet
3B00:xxB2 nic.mdm Command Timeout for Wait Packet
3B00:xxB3 nic.mdm Data Signature did not match
3B00:xxB4 nic.mdm Packet Number did not match
3C00:xx02 nic8254x.mdm Initialization failure. Unable to allocate memory for %s.
3C00:xx19 nic8254x.mdm Invalid Checksum. Expected %04Xh. Read %04Xh.
3C00:xx1A nic8254x.mdm Pattern test failed @%08lX Expected %lXh, Actual %lXh.
3C00:xx1B nic8254x.mdm Invalid interrupt count. Step %d Mask %lXh Cause %lXh. Expected %Xh, found %Xh.
3C00:xx1C nic8254x.mdm Transmit head pointer is invalid.
3C00:xx1D nic8254x.mdm Transmit header overflow.
3C00:xx1E nic8254x.mdm Transmit payload overflow.
3C00:xx1F nic8254x.mdm Received packet %d was corrupted.
3C00:xx20 nic8254x.mdm No received packets.
3C00:xx21 nic8254x.mdm No response.
3C00:xx22 nic8254x.mdm Unknown Failure.
3C00:xx23 nic8254x.mdm Unable to read EEPROM contents. Reason: %s
3D00:xx02 parallel.mdm Memory allocation error. Unable to create %s.
3D00:xx19 parallel.mdm One or more of the parallel port registers failed the internal test. %s
3D00:xx1A parallel.mdm Failed the control register to status register loopback test. %s
3D00:xx1B parallel.mdm Failed the data loopback test. %s
3D00:xx1C parallel.mdm Errors indicate that a loopback plug may be installed on this port! %s
3D00:xx1D parallel.mdm Errors may be because there is no loopback plug installed on this port! %s
3D00:xx1E parallel.mdm Errors indicate that an incorrect loopback plug may be installed on this port. %s
3D00:xx1F parallel.mdm Incorrect interrupt count. IRQ %d. Expected %d interrupts but received %d.
3D00:xx20 parallel.mdm No interrupts were generated. This may be a problem with the parallel port, or the interrupt circuitry on the system, or the system’s interrupt configuration.
3D00:xx21 parallel.mdm Timeout error waiting for printer. Status Error (%Xh).
3D00:xx22 parallel.mdm All data bits failed on a bidirectional test. %s
3F00:xx02 pci.mdm Initialization Failure. Unable to allocate memory for %s.
4000:xx02 perc2ada.mdm Constructor failure. Insufficient memory to create device objects at line %d.
4000:xx02 perc2ada.mdm Initialization code failed. Memory allocation failure at line %d.
4100:xx02 pnp.mdm Initialization failure. Memory below 1 MB is not available.
4100:xx02 pnp.mdm Initialization failure. Unable to allocate memory for %s.
4300:xx02 raid.mdm Memory allocation failure creating %s.
4300:xx19 raid.mdm BIOS Checksum mismatch. Expected %04Xh, but found %04Xh at line %d.
4300:xx1A raid.mdm Non-ECC DRAM or XOR disabled.
4300:xx1B raid.mdm Unknown DRAM error.
4300:xx1C raid.mdm Timeout waiting for controller at line %d.
4300:xx1D raid.mdm Timeout waiting for controller. Unable to write DRAM address %Xh from host address %Xh (%d bytes).
4300:xx1E raid.mdm Timeout waiting for controller. Unable to read DRAM address %Xh to host address %X (%d bytes).
4300:xx1F raid.mdm Incomplete status from controller.
4300:xx20 raid.mdm Unable to load sequencer at line %d.
4300:xx21 raid.mdm Sequencer reported a self-test failure at line %d.
4300:xx22 raid.mdm Bus Master unable to transfer data at line %d.
4300:xx23 raid.mdm Memory size mismatch. Found %d MB, but user specified the size to be %d.
4300:xx24 raid.mdm Error sizing ROM. Expected size of %d MB but found %d MB at line %d.
4300:xx25 raid.mdm Internal error, DRAM size is 0.
4300:xx26 raid.mdm Memory miscompare. Failure at offset %Xh. Expected %02Xh but found %02Xh at line %d.
4400:xx00 scsi.mdm Beginning block percentage (%d%%)(%d) is past specified ending block (%d).
4400:xx00 scsi.mdm Ending block number (%d) must be greater than beginning block number (%d).
4400:xx00 scsi.mdm Ending block percentage (%d%%)(%d) is before specified beginning block (%d).
4400:xx00 scsi.mdm Ending block percentage (%d) must be greater than beginning block percentage (%d).
4400:xx00 scsi.mdm Specified combination of block ranges/percentages is an invalid configuration.
4400:xx00 scsi.mdm Specifying both Enable write cache after test and Disable write cache after test is inconsistent behavior.
4400:xx00 scsi.mdm Specifying report soft errors but implement error correction is inconsistent.
4400:xx00 scsi.mdm Specifying startdst and completedst on the same command line is inconsistent.
4400:xx02 scsi.mdm %s called with status 0, block %lu
4400:xx02 scsi.mdm Cannot add parameter %s. The parameter type %d is not supported in the cScsiDevice constructor.
4400:xx02 scsi.mdm Error allocating memory for test: Requested %d bytes Line (%d)
4400:xx02 scsi.mdm Fatal error calling controller support module.
4400:xx02 scsi.mdm fGetParam not able to find the parameter ‘%s’.
4400:xx02 scsi.mdm Insufficient memory to allocate a cMchModule object.
4400:xx02 scsi.mdm Insufficient memory to allocate a sDDS3Info object.
4400:xx02 scsi.mdm Invalid command received: Command %x, target id %d, LUN %d, manufacturer %s, product %s
4400:xx02 scsi.mdm Stack error creating the device name(%d) or mnemonic(%d)
4400:xx02 scsi.mdm Unable to allocate memory for the device class.
4400:xx19 scsi.mdm Recovered error
4400:xx1A scsi.mdm Target not ready
4400:xx1B scsi.mdm Medium error
4400:xx1C scsi.mdm Target hardware error
4400:xx1D scsi.mdm Invalid request
4400:xx1E scsi.mdm Unit attention
4400:xx1F scsi.mdm Target was read- or write-protected
4400:xx20 scsi.mdm Blank check
4400:xx21 scsi.mdm Vendor-specific error
4400:xx22 scsi.mdm Copy aborted
4400:xx23 scsi.mdm Aborted command
4400:xx24 scsi.mdm Equal
4400:xx25 scsi.mdm Volume overflow
4400:xx26 scsi.mdm Miscompare
4400:xx27 scsi.mdm Reserved for future use
4400:xx28 scsi.mdm Interface parity error
4400:xx29 scsi.mdm Unknown target error
4400:xx2A scsi.mdm Unknown error
4400:xx2B scsi.mdm No supported controllers were located
4400:xx2C scsi.mdm No targets installed
4400:xx2D scsi.mdm Invalid adapter number specified
4400:xx2E scsi.mdm Invalid target number specified
4400:xx2F scsi.mdm Invalid block number specified
4400:xx30 scsi.mdm Error allocating memory
4400:xx31 scsi.mdm Target not responding
4400:xx32 scsi.mdm Unknown host error
4400:xx33 scsi.mdm Error data not corrected by ECC algorithm
4400:xx34 scsi.mdm Timeout waiting for adapter idle
4400:xx35 scsi.mdm Timeout waiting for adapter reset completion
4400:xx36 scsi.mdm Timeout waiting for data out port empty
4400:xx37 scsi.mdm Timeout waiting for data in port full
4400:xx38 scsi.mdm Adapter board self-test failed
4400:xx39 scsi.mdm Host adapter command error
4400:xx3A scsi.mdm Command timeout
4400:xx3B scsi.mdm Target logical unit is busy
4400:xx3C scsi.mdm Command control block aborted by host
4400:xx3D scsi.mdm Data compare error
4400:xx3E scsi.mdm Unknown DMA channel
4400:xx3F scsi.mdm Unknown interrupt channel
4400:xx40 scsi.mdm Timeout waiting for CSIRINT bit to clear
4400:xx41 scsi.mdm Timeout waiting for CSIRCMP bit
4400:xx42 scsi.mdm Pointer returned in mailbox is incorrect
4400:xx43 scsi.mdm Timeout waiting for Semaphore
4400:xx44 scsi.mdm Target does not have removable media
4400:xx45 scsi.mdm Selection time out
4400:xx46 scsi.mdm Data overrun or underrun
4400:xx47 scsi.mdm Unexpected bus free
4400:xx48 scsi.mdm Invalid phase change
4400:xx49 scsi.mdm Invalid command
4400:xx4A scsi.mdm Invalid target direction received from host
4400:xx4B scsi.mdm Duplicate CCB received in target mode
4400:xx4C scsi.mdm Invalid parameters
4400:xx4D scsi.mdm Invalid data list
4400:xx4E scsi.mdm CPU diagnostic error
4400:xx4F scsi.mdm Buffer RAM diagnostic error
4400:xx50 scsi.mdm Static RAM diagnostic fail
4400:xx51 scsi.mdm Adapter cache tag RAM diag fail
4400:xx52 scsi.mdm BMIC Chip Diagnostic Error
4400:xx53 scsi.mdm ROM Checksum Error
4400:xx54 scsi.mdm Invalid Data in Config Reg
4400:xx55 scsi.mdm Buffer Parity Error
4400:xx56 scsi.mdm EISA Bus Transfer Parity Error
4400:xx57 scsi.mdm EISA Interface Transfer Error
4400:xx58 scsi.mdm Unable to abort
4400:xx59 scsi.mdm Request sense failed
4400:xx5A scsi.mdm Unexpected command complete message
4400:xx5B scsi.mdm Initial controller power-up
4400:xx5C scsi.mdm Message reject received
4400:xx5D scsi.mdm Invalid logical unit number
4400:xx5E scsi.mdm Bus busy
4400:xx5F scsi.mdm Bus reset
4400:xx60 scsi.mdm CCB length inadequate
4400:xx61 scsi.mdm Invalid initiator ID
4400:xx62 scsi.mdm Host adapter RAM parity error
4400:xx63 scsi.mdm Firmware not downloaded
4400:xx64 scsi.mdm Acknowledge timeout
4400:xx65 scsi.mdm IRQ Error
4400:xx66 scsi.mdm Timeout waiting for sequencer to pause
4400:xx67 scsi.mdm Timeout waiting for REQ
4400:xx68 scsi.mdm Timeout waiting for BSY
4400:xx69 scsi.mdm Timeout waiting for DMA to complete
4400:xx6A scsi.mdm Invalid IRQ received
4400:xx6B scsi.mdm Cannot perform test, no audio tracks to play
4400:xx6C scsi.mdm No audio output
4400:xx6D scsi.mdm Command not completed by target
4400:xx6E scsi.mdm Bad status returned by target
4400:xx6F scsi.mdm Incompatible CD for testing
4400:xx70 scsi.mdm Unable to retrieve diags page %d. Line (%d)
4400:xx71 scsi.mdm Unable to obtain temperature
4400:xx72 scsi.mdm The fans are reported not at full speed
4400:xx73 scsi.mdm Under temperature sensor failure
4400:xx74 scsi.mdm Over temperature sensor failure
4400:xx75 scsi.mdm User indicated that the test failed. Line (%d)
4400:xx76 scsi.mdm Test is not applicable to the selected device
4400:xx77 scsi.mdm Fatal autoloader error. Check tape magazine and restart diagnostics
4400:xx78 scsi.mdm Medium size was reported as 0
4400:xx79 scsi.mdm Data compare error. Line (%d): Block %u, Offset %lu – Data was %02.2Xh, Should be %02.2Xh
4400:xx7A scsi.mdm Tape Unit did not become ready
4400:xx7B scsi.mdm Unable to allocate %d bytes of memory. Line (%d)
4400:xx7C scsi.mdm Number of %s defect list entries (%d) exceeded limit specified (%d)
4400:xx7D scsi.mdm Cannot run test without seven or eight tapes in the cartridge.
4400:xx7E scsi.mdm Drive Self Test failed with error value (0x%02.2X)(%s)
4400:xx7F scsi.mdm Read/Write Buffer Test data mismatch.
4400:xx80 scsi.mdm SMART Failure prediction threshold exceeded
4400:xx81 scsi.mdm Command queue full
4400:xx82 scsi.mdm An unrecognized or unsupported message was received.
4400:xx83 scsi.mdm The requested transfer size was too large.
4400:xx84 scsi.mdm The self-test took too long to run
4400:xx85 scsi.mdm %s Mode page %02X[%02X] read %02lX, expected %02lX, mask %02lX
4400:xx86 scsi.mdm Drive total logical blocks %ld is in between defined sizes %ld \”%s\” and %ld \”%s\”
4400:xx87 scsi.mdm Drive speed %s is slower than Ctlr speed %s
4400:xx88 scsi.mdm Expected Transfer Period %02X (%s), actual period %02X (%s)
4400:xx89 scsi.mdm Expected Transfer Width %02X (%s), actual width %02X (%s)
4400:xx8A scsi.mdm TapeAlert: Tape needs cleaning now
4400:xx8B scsi.mdm TapeAlert: Tape drive is due for routine cleaning
4400:xx8C scsi.mdm Invalid bus number specified
4400:xx8D scsi.mdm The drive was not found in the firmware database specified
4400:xx8E scsi.mdm Incorrect firmware version
4400:xx8F scsi.mdm Could not find the firmware update file
4400:xx90 scsi.mdm Error changing directories
4400:xx91 scsi.mdm Error retrieving the path to the firmware file
4400:xx92 scsi.mdm No files or subdirectories found in the firmware root directory
4400:xx93 scsi.mdm Error saving the default directory
4400:xx94 scsi.mdm Error restoring the default directory
4400:xx95 scsi.mdm Invalid firmware file root directory
4400:xx96 scsi.mdm Error reading the firmware database file
4400:xx97 scsi.mdm Error opening the firmware database file
4400:xx98 scsi.mdm Error reading the firmware update file
4400:xx99 scsi.mdm Error retrieving the size of the firmware file
4400:xx9A scsi.mdm Error opening the firmware update file
4400:xx9B scsi.mdm Logical drive is not configured or is ‘FAILED’
4400:xx9C scsi.mdm Tape speed %s is not equal to expected speed %s
4400:xx9D scsi.mdm Firmware update failed because Tape media was present
4400:xx9E scsi.mdm Tape unload failed
4400:xx9F scsi.mdm Physical drive is not ‘OPTIMAL’, test not possible at this time
4400:xxA0 scsi.mdm Firmware file is not ‘LIF’ format
4400:xxA1 scsi.mdm Firmware file is the wrong ‘LIF’ format
4400:xxA2 scsi.mdm Reservation conflict
4400:xxA3 scsi.mdm Device I/O error
4400:xxA4 scsi.mdm Read error
4400:xxA5 scsi.mdm No path available to the device
4400:xxA6 scsi.mdm No cable is connected
4400:xxA7 scsi.mdm Logical drive Check Consistency(CC) is in progress
4400:xxA8 scsi.mdm Logical drive initialization is in progress
4400:xxA9 scsi.mdm Logical drive rebuild is in progress
4400:xxAA scsi.mdm Logical drive reconstruction is in progress
4400:xxAB scsi.mdm Controller hardware error
4400:xxAC scsi.mdm Physical drive CLEAR in progress
4400:xxAD scsi.mdm Unable to use SATA(SAS) drive to replace SAS(SATA)
4400:xxAE scsi.mdm Command issues while firmware is in wrong state
4400:xxAF scsi.mdm Logical drive is offline – I/O not possible
4400:xxB0 scsi.mdm Logical drive reservation is already in progress
4400:xxB1 scsi.mdm Controller diagnostics failed
4400:xxB2 scsi.mdm Receive Diagnostics Results Page error
4400:xxB3 scsi.mdm Incorrect STRING-IN Page Code received
4400:xxB4 scsi.mdm Firmware image header bytes do not match header length
4400:xxB5 scsi.mdm Firmware image validation error
4400:xxB6 scsi.mdm Firmware Download Unsuccessful. FW versions mismatch.
4400:xxB7 scsi.mdm Send Diagnostics STRING-OUT Page Error. String Out Command Code [%d]
4400:xxB8 scsi.mdm Processor(Backplane-FlexBay) Firmware Download error
4400:xxB9 scsi.mdm Older Binary Image Version. Image version [%s] Processor(BP/FB) Version [%s]
4400:xxBA scsi.mdm Binary Image Version Same. Image version [%s] Processor(BP/FB) Version [%s]
4400:xxBB scsi.mdm Writing to backplane error. Chunk# %d
4400:xxBC scsi.mdm SAS SMP request failed
4400:xxBD scsi.mdm SAS SMP data overrun
4400:xxBE scsi.mdm USB bus error or timeout.
4400:xxBF scsi.mdm USB device was removed. You must restart the diagnostics to re-detect this device.
4400:xxC0 scsi.mdm Recovery Time Limit can not be changed for mode page %d
4400:xxC1 scsi.mdm Recovery Time Limit mismatch for mode page %d, read %d expected %d
4400:xxC2 scsi.mdm TapeAlert: The tape drive has a hardware fault
4400:xxC3 scsi.mdm TapeAlert: The tape drive has a problem with the host interface (cables)
4400:xxC4 scsi.mdm Controller is not in an operational state.
4400:xxC5 scsi.mdm Controller is offline (caused by a command timeout).
4500:xx02 serial.mdm Failure during device detection. Infrared controller found, but without port service
4500:xx02 serial.mdm Failure during device detection. Infrared service from system module not accessible at line %d
4500:xx02 serial.mdm Failure during device detection. Memory allocation error at line %d.
4500:xx02 serial.mdm Failure during device detection. Unknown infrared controller %d
4500:xx02 serial.mdm Invalid hardware configuration. Port %Xh has IRQ assigned as %Xh.
4500:xx02 serial.mdm Memory allocation error during class constructor. %s
4500:xx02 serial.mdm Memory allocation error. Module class can not be instantiated.
4500:xx02 serial.mdm Memory allocation error. Serial class can not be instantiated for port %d.
4500:xx02 serial.mdm Memory allocation error. Unable to create the a serial service port object.
4500:xx02 serial.mdm Port is operating outside of allowable speed tolerances. Port base address %Xh experienced %d interrupts against a limit of %d interrupts.
4500:xx19 serial.mdm Port is operating outside of allowable speed tolerances. Port base address %Xh is transmitting at %d cps, against an expected %d cps.
4500:xx1A serial.mdm Real time clock is not functioning. System BIOS reports repeated failure to read the clock. The serial tests make use of the system real time clock for determining elapsed time, and can not be used if the real time clock is not functional.
4500:xx1B serial.mdm Real time clock is not functioning. System BIOS can no longer read the clock. The serial tests make use of the system real time clock for determining elapsed time, and can not be used if the real time clock is not functional.
4500:xx1C serial.mdm Incorrect number of interrupts received. Port base address %Xh, irq %d, received %d interrupts but was expecting 1.
4500:xx1D serial.mdm Failure on Modem Control Register loopback. Port base address %Xh expected character %02x but received %02x.
4500:xx1E serial.mdm Failure on internal loopback. Port base address %Xh.
4500:xx1F serial.mdm Failure on Line Status Register loopback. Port base address %Xh, transmit buffer not empty.
4500:xx20 serial.mdm Failure on Line Status Register loopback. Port base address %Xh, expected data not received.
4500:xx21 serial.mdm Failure on Line Status Register loopback. Port base address %Xh, overrun error not detected.
4500:xx22 serial.mdm Failure on Line Status Register loopback. Port base address %Xh, transmit buffer not empty on retransmission.
4500:xx23 serial.mdm Failure when using external loopback connector. Modem control register continues to show activity.
4500:xx24 serial.mdm Failure when using external loopback connector. Clear to send not seen in modem control. Possible missing loopback connector.
4500:xx25 serial.mdm Failure when using external loopback connector. Clear to send not seen in modem control.
4500:xx26 serial.mdm Failure when using external loopback connector. Carrier detect and data set ready not seen in modem control register.
4500:xx27 serial.mdm Failure when using external loopback connector. Data set ready and data carrier bits did not clear in modem control register.
4500:xx28 serial.mdm Failure when using external loopback connector. Line control register test failure.
4500:xx29 serial.mdm Failure when using external loopback connector. Receive data not ready, baud select %d, expected %02x.
4500:xx2A serial.mdm Failure when using external loopback connector. Data mismatch on transmission, found %02lx, expected %02x.
4500:xx2B serial.mdm Failure when using external loopback connector. Buffer full interrupt not received.
4500:xx2C serial.mdm Failure when using external loopback connector. Line status interrupt not received.
4500:xx2D serial.mdm Failure when using external loopback connector. Line status interrupt for second character not received.
4500:xx2E serial.mdm Failure when using external loopback connector. Modem status interrupt not received.
4600:xx02 smbios.mdm Can not locate service %s (%d)
4600:xx02 smbios.mdm Initialization failure. Unable to allocate a selector to the tables.
4600:xx02 smbios.mdm Initialization failure. Unable to allocate memory for %s.
4600:xx19 smbios.mdm Structure count error. Found %d, expected %d structures.
4600:xx1A smbios.mdm Unable to access device state. SMI handler returned error (%xh) while trying to retrieve the device state.
4600:xx1B smbios.mdm Parameter requested instance %d of type %d structure does not exist.
4600:xx1C smbios.mdm Device State Out of Acceptable Range.
4600:xx1E smbios.mdm %s %d – %s.
4600:xx1E smbios.mdm %s %s – %s.
4600:xx1F smbios.mdm SmBios structure %d has illegal 0-length.
4600:xx20 smbios.mdm SmBios calling interface function failed.
4600:xx21 smbios.mdm Wireless switch not in the ‘%s’ position.
4600:xx22 smbios.mdm System powered up via Media Direct button.
4700:xx02 smbus.mdm The SMBus service failed during initialization. Unable to allocate memory for %s.
4800:xx02 smi.mdm Failed to allocate memory for %s NMI services.
4800:xx02 smi.mdm Failed to allocate memory for %s SMI services.
4800:xx02 smi.mdm Illegal attempt to disable %s SMI without restoring original values first.
4800:xx02 smi.mdm Illegal attempt to restore %s SMI without first saving the initial state.
4800:xx02 smi.mdm Unable to locate required %s controller.
4B00:xx02 sysbdmon.mdm Failed to add the %s test
4B00:xx02 sysbdmon.mdm Failed to create the %s module
4B00:xx02 sysbdmon.mdm Failed to create the %s object
4B00:xx17 sysbdmon.mdm %s: Failed to send SMBus command.
4B00:xx17 sysbdmon.mdm Unable to read ADM1026 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to read ADM1027 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to read ADT7460 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to read EMC6W201 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to write ADM1026 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to write ADM1027 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to write ADT7460 (0x%02X) register (0x%02X) using SMBus
4B00:xx17 sysbdmon.mdm Unable to write EMC6W201 (0x%02X) register (0x%02X) using SMBus
4B00:xx18 sysbdmon.mdm %s input is out of range. Current = %.3f Max = %.3f Min = %.3f.
4B00:xx1F sysbdmon.mdm Intrusion Detection Bit is set, Expected no intrusion.
4B00:xx20 sysbdmon.mdm %s temperature is out of range. Current = %d Celsius Max = %d Celsius Min = %d Celsius.
4B00:xx20 sysbdmon.mdm Temperature is out of range. Current = %.3f. Max = %.3f. Min = %.3f.
4B00:xx21 sysbdmon.mdm %s speed is out of range. Current = %.3f. Min = %.3f.
4B00:xx21 sysbdmon.mdm %s speed is out of range. Current = %u RPM Max = %u RPM Min = %u RPM.
4B00:xx22 sysbdmon.mdm Failed to send MAX1617 Start-Conversion command.
4B00:xx23 sysbdmon.mdm Time-out waiting for the conversion to finish.
4B00:xx24 sysbdmon.mdm Power Supply %s is installed but its status is NOT OK.
4B00:xx25 sysbdmon.mdm The number of power supplies specified, %d, is not the same as the number found, %d.
4B00:xx26 sysbdmon.mdm Temperature is out of range. Current = %.1f. OverTemperature Shutdown = %.1f.
4B00:xx28 sysbdmon.mdm Unable to reserve the local I2C bus for use.
4B00:xx29 sysbdmon.mdm Temperature signal indicates an open or short condition. Signal is %s
4B00:xx2A sysbdmon.mdm %s fan is not connected or not spinning.
4B00:xx2B sysbdmon.mdm Hardware monitor indicates current or recent %s failure.
4C00:xx19 system.mdm Speaker could not be heard. The operator replied ‘No’ to the prompt indicating that the tones were not heard from the speaker.
4C00:xx1A system.mdm The interrupt routine is not being called. Channel 0 (mode 0) is not generating interrupts. It might not be counting properly or the interrupt mechanism is not working.
4C00:xx1B system.mdm Interrupt IRQ0 is at the wrong frequency. Channel 0 (mode 3) is generating the wrong interrupt count per second. Expected :%d, Actual: %d.
4C00:xx1C system.mdm Channel 2 is not operating correctly. %s
4C00:xx1D system.mdm The ‘Seconds’ register is not updating. The register is not updating or is updating too slowly. The part may be bad or the 32-KHz crystal might not be functioning.
4C00:xx1E system.mdm The time registers did not increment correctly. The RTC did not generate the expected time after it was set for the maximum value and allowed to roll-over.
4C00:xx1F system.mdm The CMOS battery failed. Status Register D of the RTC chip indicates that the CMOS is not valid because the backup battery is not working.
4C00:xx20 system.mdm CMOS failed the pattern test. Location: %02Xh, Expected: %02Xh, Actual: %02Xh.
4C00:xx21 system.mdm Incorrect data testing the DMA %s. Port: %02Xh Expected: %02Xh Actual: %02Xh.
4C00:xx22 system.mdm The interrupt controller, or a device attached to it, is not working. No interrupt detected for IRQ %d – %s.
4C00:xx23 system.mdm A PC card is not seated properly. Check the card in socket %c (index %Xh, base %Xh).
4C00:xx24 system.mdm Unable to access any PCIC register.
4C00:xx25 system.mdm One or more PCIC registers failed.
4C00:xx26 system.mdm Failed to load and store constant 0.0.
4C00:xx26 system.mdm Failed to load and store constant 1.0.
4C00:xx26 system.mdm Failed to load and store constant ln 2.
4C00:xx26 system.mdm Failed to load and store constant log 2.
4C00:xx26 system.mdm Failed to load and store constant log2 of 10.
4C00:xx26 system.mdm Failed to load and store constant log2 of ‘e’.
4C00:xx26 system.mdm Failed to load and store constant ‘pi’.
4C00:xx27 system.mdm Failed to load and store integer 1.
4C00:xx27 system.mdm Failed to load integer 1 and store as BCD.
4C00:xx27 system.mdm Failed to load integer 1 and store as long real 1.0.
4C00:xx27 system.mdm Failed to load integer 1 and store as short real 1.0.
4C00:xx27 system.mdm Failed to load integer 32767 and store as short real 32767.0.
4C00:xx27 system.mdm Failed to load integer -32768 and store as short real -32768.0.
4C00:xx27 system.mdm Failed to load long real 0.0 and store as integer 0.
4C00:xx27 system.mdm Failed to load long real 1.0 and store as integer 1.
4C00:xx27 system.mdm Failed to load long real -1.0 and store as integer -1.
4C00:xx27 system.mdm Failed to load short real 0.0 and store as integer 0.
4C00:xx27 system.mdm Failed to load short real 1.0 and store as integer 1.
4C00:xx27 system.mdm Failed to load short real -1.0 and store as integer -1.
4C00:xx28 system.mdm Wrong status after 1.0 / 0.0.
4C00:xx28 system.mdm Wrong status after comparing 1.0 and 1.0.
4C00:xx28 system.mdm Wrong status after comparing 2.0 and 3.0.
4C00:xx28 system.mdm Wrong status after comparing 3.0 and 2.0.
4C00:xx29 system.mdm Wrong stack tags after ‘fadd’ instruction.
4C00:xx29 system.mdm Wrong stack tags after ‘faddp’ instruction.
4C00:xx2A system.mdm Wrong status after 2.0 – 3.0.
4C00:xx2A system.mdm Wrong status after 3.0 – 2.0.
4C00:xx2A system.mdm Wrong status after 3.0 * 2.0.
4C00:xx2A system.mdm Wrong status after 3.0 / 2.0.
4C00:xx2A system.mdm Wrong status after 3.0 + 2.0.
4C00:xx2B system.mdm Calculation error of 3.0 / 2.0.
4C00:xx2B system.mdm Calculation error of arctangent (tangent (pi/4.0)) * 4.0.
4C00:xx2B system.mdm Calculation error of log2(((2 ** (pi/8)) -1) + 1) * 8.
4C00:xx2B system.mdm Calculation error of the square root of 2.0.
4C00:xx2C system.mdm Wrong status after generating a denormalized operand.
4C00:xx2C system.mdm Wrong status after generating a precision failure.
4C00:xx2C system.mdm Wrong status after generating an overflow.
4C00:xx2C system.mdm Wrong status after generating an underflow.
4C00:xx2C system.mdm Wrong status after performing a divide by zero.
4C00:xx2C system.mdm Wrong status after purposely performing an invalid operation.
4C00:xx2D system.mdm No IRQ13 following a denormalized operand.
4C00:xx2D system.mdm No IRQ13 following a precision exception.
4C00:xx2D system.mdm No IRQ13 following a zero divide.
4C00:xx2D system.mdm No IRQ13 following an invalid result.
4C00:xx2D system.mdm No IRQ13 following an overflow.
4C00:xx2D system.mdm No IRQ13 following an underflow.
4C00:xx2E system.mdm ACPI Timer is not found in the system.
4C00:xx2E system.mdm Unable to access any PCIC register. First error:\n Socket: %c (index %Xh, base %Xh)\n Register index: %Xh\n Test pattern: %Xh\n Data read: %Xh\n Bits tested: %Xh\n
4C00:xx2F system.mdm ACPI Timer is dead, not updating.
4C00:xx2F system.mdm One or more PCIC registers failed. First error:\n Socket: %c (index %Xh, base %Xh)\n Register index: %Xh\n Test pattern: %Xh\n Data read: %Xh\n Bits tested: %Xh\n
4C00:xx30 system.mdm ACPI Timer is not running correctly, otherwise system timer 2 is broken.
4C00:xx31 system.mdm RTC verification by ACPI timer failed.
4C00:xx32 system.mdm ACPI timer verification by RTC failed.
4E00:xx02 usb.mdm File %s line %d. Out of memory.
4E00:xx02 usb.mdm Unable to locate service %s.
4E00:xx19 usb.mdm Unable to get register #%u mask.
4E00:xx1A usb.mdm Unable to read register #%u.
4E00:xx1B usb.mdm Unable to write register #%u.
4E00:xx1C usb.mdm Register #%u read or write failed (8-bit). Found:%02Xh Expected:%02Xh.
4E00:xx1D usb.mdm Register #%u read or write failed (16-bit). Found:%04Xh Expected:%04Xh.
4E00:xx1E usb.mdm Register #%u read or write failed (32-bit). Found:%08Xh Expected:%08Xh.
4E00:xx1F usb.mdm Unable to disable UHCI interrupts.
4E00:xx20 usb.mdm Unable to reset UHCI controller.
4E00:xx21 usb.mdm Unable to process End Point Descriptor.
4E00:xx22 usb.mdm Unable to allocate enough memory for UHCI control structures.
4E00:xx23 usb.mdm Incorrect Memory Structure Test #%u requested.
4E00:xx24 usb.mdm FRNUM Register is not walking frame list.
4E00:xx25 usb.mdm FmRemaining register is not decrementing.
4E00:xx26 usb.mdm FRNUM register indicates controller stopped polling at wrong index. Checking bad maximum length in a TD.
4E00:xx26 usb.mdm FRNUM register indicates controller stopped polling at wrong index. Checking bad Packet ID in a TD.
4E00:xx26 usb.mdm FRNUM register indicates controller stopped polling at wrong index. Checking Que Headers.
4E00:xx26 usb.mdm FRNUM register indicates controller stopped polling at wrong index. Checking that Frame List Counter Wraps.
4E00:xx26 usb.mdm FRNUM register indicates controller stopped polling at wrong index. Verifying that Frame List Counter Wraps.
4E00:xx27 usb.mdm Expected the run/stop bit in USBCMD register to clear. Controller did not properly detect faulty transaction (bad TD PID) data.
4E00:xx28 usb.mdm USB controller did not generate the error interrupt that was expected.
4E00:xx29 usb.mdm Unable to clear USBSTS register bit.
4E00:xx2A usb.mdm USB controller did not set the correct bits in USBSTS when given a bad TD PID.
4E00:xx2B usb.mdm USB controller %d shows an over-current indication on %s
5300:xx02 video.mdm %s (line %d). Insufficient memory to create %s.
5300:xx19 video.mdm Detected a failure while writing and reading video memory. Video mode: %Xh (%dx%dx%d). Address %Xh, expected to read %Xh, but read %Xh instead.
5300:xx1A video.mdm User-specified video mode not supported.
5300:xx1B video.mdm Detected a failure while read/write testing the video Cursor Control Registers. Wrote %4.4X, but read back %4.4X.
5300:xx1C video.mdm Detected a problem with retrace status. The retrace status bits do not appear to be changing state.
5300:xx1D video.mdm The user’s response indicated a failure of text page %d (in mode 2).
5300:xx1E video.mdm The user’s response indicated a failure of a text mode pattern using video mode: %Xh (%dx%dx%d).
5300:xx1F video.mdm The user’s response indicated a failure of a graphic pattern using video mode: %Xh (%dx%dx%d).
5300:xx20 video.mdm The user’s response indicated a failure of one of the solid color patterns.
5300:xx21 video.mdm The user’s response indicated a failure.
5300:xx22 video.mdm Error occured while switching video modes.
5300:xx23 video.mdm No BIOS support for SMI interface function.
5300:xx24 video.mdm Error accessing the LCD inverter.
5300:xx25 video.mdm Unable to detect inverter lamp status.
5300:xx26 video.mdm Unable to detect %s of suspend switch.
5300:xx27 video.mdm Unable to detect %s LCD panel.
5300:xx28 video.mdm ALS test error, %s interface function failed.
5300:xx29 video.mdm ALS %s test error. Expected: %02Xh Found: %02Xh.
5300:xx2A video.mdm M07 inverter not found.
5500:xx00 lsi.mdm Controller is not in an operational state.
5500:xx00 lsi.mdm Controller is offline (caused by a command timeout).
5500:xx02 lsi.mdm Allocate of page buffer failed.
5500:xx02 lsi.mdm Found more than 100 controllers – aborting on probable BIOS error.
5500:xx02 lsi.mdm Initialization code failed. Unable to map %X into data segment.
5500:xx02 lsi.mdm Invalid parameters passed to fExecuteCommand function.
5500:xx02 lsi.mdm Memory allocation failure.
5500:xx02 lsi.mdm Unknown controller type %x.
5500:xx08 lsi.mdm Controller Firmware has not started initialization. This may indicate a hardware problem.
5500:xx08 lsi.mdm Controller Firmware hits a fault condition.
5500:xx08 lsi.mdm Controller Firmware is in a unknown (reserved) state.
5500:xx08 lsi.mdm Controller Firmware low-level initialization code is executing, Wait for it to finish.
5500:xx08 lsi.mdm Unreachable code has been executed (Default case).
5800:xx02 mpcache.mdm Only %d paragraphs of memory are available below 1 MB and the test needs %d paragraphs.
5800:xx02 mpcache.mdm Unable to allocate memory for %s.
5800:xx02 mpcache.mdm Unable to create memory mapping for I/O APIC or the local APIC.
5800:xx1A mpcache.mdm Unexpected interrupt found on CPU %2Xh. Interrupt %02Xh occurred at address %04X:%08Xh (offset %04Xh in the module).
5800:xx1C mpcache.mdm Auxiliary processor has failed. CPU (%02Xh) did not transition to protected mode.
5800:xx1D mpcache.mdm Auxiliary processor has failed. Unable to issue STARTUP message to CPU (%02Xh).
5800:xx1E mpcache.mdm Auxiliary processor has failed. Unable to issue INIT message to CPU (%02Xh).
5800:xx1F mpcache.mdm Unable to relocate the code to start the other processors to below 1 MB.
5800:xx21 mpcache.mdm Internal program error. No space left in the control tables to manage an additional CPU.
5800:xx22 mpcache.mdm Unable to stop non-boot processors. The system might be unstable and should be rebooted.
5800:xx23 mpcache.mdm Auxiliary processor has failed. Unable to send a command to CPU %02Xh.
5800:xx24 mpcache.mdm Auxiliary processor has failed. Unable to get a result from CPU %02Xh.
5800:xx26 mpcache.mdm Internal program error. Unable to locate the CPU with APIC ID %02Xh in the control tables.
5800:xx27 mpcache.mdm Internal program error. Code segment corruption was detected.
5800:xx28 mpcache.mdm Internal program error. Unknown error (%02Xh) during the test.
5800:xx2A mpcache.mdm CPU %d, Data error at address %04x. Expected %04x, but found %04x.
5800:xx2D mpcache.mdm Timeout waiting for CPU %d to reach step %d.
5800:xx2E mpcache.mdm Unknown application processor error on CPU %d.
5900:xx00 usbmouse.mdm No mouse or unknown mouse type.
5900:xx00 usbmouse.mdm The user has requested an abort of the currently executing test.
5900:xx1A usbmouse.mdm Something was wrong in URB request
5900:xx1B usbmouse.mdm No resources – try again later
5900:xx1C usbmouse.mdm Usb Request Block did not complete
5900:xx1D usbmouse.mdm Unknown USB status
5900:xx1E usbmouse.mdm Endpoint is stalled
5900:xx1F usbmouse.mdm Buffer error – under/overrun
5900:xx20 usbmouse.mdm Babble detected
5900:xx21 usbmouse.mdm Received NAK
5900:xx22 usbmouse.mdm CRC error or timeout
5900:xx23 usbmouse.mdm Bit stuffing error
5900:xx2D usbmouse.mdm Timeout error, waiting for user to complete test.
5900:xx60 usbmouse.mdm Usb Failure to get configuration Information
5900:xx61 usbmouse.mdm Usb Service Initialization Failure
5900:xx62 usbmouse.mdm Unable to allocate memory for %s.
5900:xx63 usbmouse.mdm Failed to allocate real memory.
5A00:xx00 usbkbd.mdm The user has requested an abort of the currently executing test.
5A00:xx02 usbkbd.mdm Unable to allocate memory for %s.
5A00:xx02 usbkbd.mdm Unable to create the screen image.
5A00:xx19 usbkbd.mdm The user’s response indicated a failure.
5A00:xx24 usbkbd.mdm A USB keyboard was found during initialization. The device is no longer responding. Communications cannot be
established again until the diagnostics are restarted.
5A00:xx25 usbkbd.mdm Unable to connect to endpoint %d.
5A00:xx26 usbkbd.mdm Unable to obtain data from the USB keyboard.
5A00:xx27 usbkbd.mdm Failed to send command to set LEDs properly.
5B00:xx02 usbohci.mdm Frame list is corrupt.
5B00:xx02 usbohci.mdm Initialization Failure. Unable to allocate memory for %s.
5B00:xx02 usbohci.mdm INTR/ISOCH list is corrupt.
5B00:xx02 usbohci.mdm Unable to map hcca page.
5C00:xx02 usbuhci.mdm Attempt to link QH to nothing or to a TD.
5C00:xx02 usbuhci.mdm Frame list is corrupt.
5C00:xx02 usbuhci.mdm Initialization Failure. Device is attached to a port, unable to allocate memory for %s.
5C00:xx02 usbuhci.mdm Initialization Failure. Unable to allocate memory for %s.
5C00:xx02 usbuhci.mdm INTR/ISOCH list is corrupt.
5C00:xx02 usbuhci.mdm Unable to map frame list local.
5D00:xx02 usbtm.mdm Attempt to overwrite port (%d)
5D00:xx02 usbtm.mdm Initialization Failure. Unable to allocate memory for %s.
5D00:xx02 usbtm.mdm Invalid device pointer
5D00:xx02 usbtm.mdm Invalid port number (%d)
5D00:xx02 usbtm.mdm Unable to create bandwidth array.
5D00:xx02 usbtm.mdm Unable to create cBootKbd.
5D00:xx02 usbtm.mdm Unable to create port array.
5D00:xx02 usbtm.mdm Unable to find protected memory service.
5D00:xx02 usbtm.mdm Unable to map data buffer local.
5D00:xx19 usbtm.mdm Unable to access USB device on HUB port %d. Reseat the USB connector, then reload the diagnostics.
5D00:xx1A usbtm.mdm Unable to access USB device on ROOT HUB port %d. Reseat the USB connector, then reload the diagnostics.
5E00:xx1E usbdevid.mdm Error detecting USB devices.
5E00:xx1F usbdevid.mdm A device was found during initialization. The device is no longer responding. Communications cannot be established
again until the diagnostics are restarted.
5E00:xx20 usbdevid.mdm Error detecting USB device. Device not found.
5E00:xx21 usbdevid.mdm Vendor or Device ID not specified
5E00:xx62 usbdevid.mdm Unable to allocate memory for %s.
5F00:xx02 usbufi.mdm An invalid parameter selection index of %d was specified in file %s, at line:%d.
5F00:xx02 usbufi.mdm An invalid test selection index of %d was specified in file %s, at line:%d.
5F00:xx02 usbufi.mdm Data comparison was requested for %u blocks, actual block sizes are %u and %u.
5F00:xx02 usbufi.mdm Diskette data buffer expected but not supplied in %s, at line %d.
5F00:xx02 usbufi.mdm Diskette drive test function entered without a system test context established.
5F00:xx02 usbufi.mdm Unable to allocate memory for %s.
5F00:xx1C usbufi.mdm The change line test has been failed at the user’s instruction.
5F00:xx1D usbufi.mdm The expected change line event was not detected.
5F00:xx1E usbufi.mdm The test was ended by user request.
5F00:xx1F usbufi.mdm The data written to and read back from the diskette media are not equivalent as expected. The diskette should be considered
corrupted.
5F00:xx20 usbufi.mdm The cylinder parameters are not compatible with the device’s cylinder range.
5F00:xx21 usbufi.mdm A system disk BIOS operation failed with the error code of %2.2Xh.
5F00:xx22 usbufi.mdm The system’s BIOS reported a \”Bad command\” status in response to the command code %2.2Xh
5F00:xx23 usbufi.mdm The system BIOS reported an access failure on the diskette media. Write-protection on the diskette should be disabled
and the test retried.
5F00:xx24 usbufi.mdm The BIOS could not operate on the location at %s, which may specify an invalid position for the diskette drive or media.
5F00:xx25 usbufi.mdm A status code returned by the BIOS indicates a device reset failure.
5F00:xx26 usbufi.mdm An uncorrectable Cyclic Redundancy Check (CRC) or Error Code Correction (ECC) data error occurred on the media at %s.
5F00:xx27 usbufi.mdm The BIOS reported that a correctable (soft) data error occurred on the diskette, which indicates that redundant error
code information was sufficient to correct the error.
5F00:xx28 usbufi.mdm The system’s BIOS status indicates that the diskette controller (a microprocessor which controls the diskette drive)
failed to operate correctly.
5F00:xx29 usbufi.mdm The BIOS status indicates the the seek operation (positioning the drive’s heads to location %s) failed.
5F00:xx2A usbufi.mdm The drive did not respond in a fixed time to an access attempt.
6100:xx02 adaptec2.mdm %s called but not implemented
6100:xx02 adaptec2.mdm Adaptec module hung, cannot continue.
6100:xx02 adaptec2.mdm Adapter hardware reset failed
6100:xx02 adaptec2.mdm AllocOSMIOB failed – Out of OSBIOB’s
6100:xx02 adaptec2.mdm Attempt to free memory not in the global memory table
6100:xx02 adaptec2.mdm Auto-Configuration failed
6100:xx02 adaptec2.mdm Cannot access the adapter hardware
6100:xx02 adaptec2.mdm Cannot allocate memory
6100:xx02 adaptec2.mdm Cannot locate the CPU service
6100:xx02 adaptec2.mdm Cannot locate the PCI service
6100:xx02 adaptec2.mdm Cannot locate the reserved memory service
6100:xx02 adaptec2.mdm Constructor failure – Insufficient memory to create device objects.
6100:xx02 adaptec2.mdm Could not initialize the adapter
6100:xx02 adaptec2.mdm Found more than 100 controllers – aborting on assumed BIOS error.
6100:xx02 adaptec2.mdm FreeOSMIOB passed a NULL pointer
6100:xx02 adaptec2.mdm Initialization code failed – Memory allocation failure at line %d.
6100:xx02 adaptec2.mdm IOB reserved memory greater than 4096 bytes
6100:xx02 adaptec2.mdm Out of memory entries in the global memory table
6100:xx02 adaptec2.mdm Reserved memory pointer is NULL
6100:xx02 adaptec2.mdm The adapter is requesting more than 4096 bytes of memory
6200:xx02 usbmass.mdm Initialization code failed. Unable to allocate physical memory, only %d pages available.
6300:xx64 hdaudio.mdm A timeout occurred while trying to access an AC97 register.
6300:xx65 hdaudio.mdm Read %Xh at AC97 register %Xh, expected %Xh.
6300:xx65 hdaudio.mdm The hub (SB/ICH) High Definition Audio service failed during initialization.
6300:xx66 hdaudio.mdm A timeout occurred while waiting for the audio controller to generate a record interrupt.
6300:xx66 hdaudio.mdm Unable to allocate memory for %s.
6300:xx67 hdaudio.mdm A timeout occurred while waiting for the audio controller to generate a playback interrupt.
6300:xx68 hdaudio.mdm A timeout occurred while waiting for the audio controller to generate an interrupt.
6300:xx69 hdaudio.mdm A wave file parameter is not supported by this service.
6300:xx6A hdaudio.mdm Primary codec is not ready.
6300:xx6B hdaudio.mdm Not enough buffer size
6300:xx6C hdaudio.mdm A timeout occurred while trying to access AC97 CODEC register %Xh.
6300:xx6D hdaudio.mdm The selected widget (%d ; 0x%02X) is not a PIN widget.
6300:xx6E hdaudio.mdm The PIN widget (%d ; 0x%02X) has a Jack Sense of %d. Expected %d.
6300:xx6F hdaudio.mdm The PIN widget (%d ; 0x%02X) has an impedance inbalance that is out of range. Right = %d Left = %d Max Delta = %d
6300:xx70 hdaudio.mdm The PIN widget (%d ; 0x%02X) does not support Impedance Testing. (%08Xh)
6500:xx02 usbehci.mdm BIOS did not release the USB ports.
6500:xx02 usbehci.mdm FATAL:BIOS did not disable the USB controller.
6500:xx02 usbehci.mdm Frame list is corrupt.
6500:xx02 usbehci.mdm Initialization Failure. Unable to allocate memory for %s.
6500:xx02 usbehci.mdm Timeout unlinking QH
6500:xx02 usbehci.mdm Unable to map frame list local.
6500:xx19 usbehci.mdm USB controller failed to start or stop.
6500:xx1A usbehci.mdm Register %x expected %08x observed %08x.
6500:xx1B usbehci.mdm USB controller failed to generate the %s interrupt.
6500:xx1C usbehci.mdm USB device on port %d is causing an over current condition. Unplug the device on USB port %d.
6500:xx1D usbehci.mdm USB controller failed to generate the correct number of frames. Frames = %d
6500:xx1E usbehci.mdm USB controller failed to correctly process the frame list.
6500:xx1F usbehci.mdm USB controller failed to correctly come out of reset.
6500:xxC8 usbehci.mdm Undefined test!
6600:xx02 usbbist.mdm Error allocating memory for test: Requested %d bytes Line (%d)
6600:xx02 usbbist.mdm Error retrieving the firmware file size: %s
6600:xx03 usbbist.mdm Error reading the firmware file: %s
6600:xx04 usbbist.mdm timeout: waited %d msec for device to respond with status before upload
6600:xx19 usbbist.mdm Self test failed with return code 0x%08X
6600:xx1A usbbist.mdm USB host error detected by the device.
6600:xx1B usbbist.mdm Timeout waiting for the device to respond.
6600:xx1C usbbist.mdm USB error detected.
6600:xx1D usbbist.mdm Invalid parameter passed to the device.
6600:xx1E usbbist.mdm Invalid status returned from the device.
6600:xx1F usbbist.mdm EnableBist command failed.
6600:xx20 usbbist.mdm StartTest command failed.
6600:xx21 usbbist.mdm GetStatus command failed.
6600:xx22 usbbist.mdm DisableBist command failed.

DELL Inspiron Resources

Tuesday, April 5, 2011

DELL Inspiron N4010 drivers

Monday, April 4, 2011

DELL Inspiron 1464 Drivers

How to Organize your Music collection

Dell Inspiron 1440 - no XP drivers

Free Dell Dock Icons

DELL SRS Premium Sound

Dell Hardware Diagnostics list

Popular Posts

Categories

Blog Archive

About Me